Search results

...n height brush]] is used in selection mode, modifications to the elevation model are made in 2 explicit steps. {{howto|title=modify the elevation model in selection mode

...d water (Water Overlay)|ground water mode]] is set to '''Complete''', this model attribute is ignored. *[[Infiltration model (Water Overlay)]]

...a model attribute (Water Overlay)|LIMIT_AREA]] Attribute of the Overlay is set to the appropriate value, calculations only occur in the locations indicate ...a model attribute (Water Overlay)|LIMIT_AREA]] Attribute of the Overlay is set to the appropriate value. Otherwise, the Limitation areas do not affect any

|description=Whether and how [[Ground model (Water Overlay)|water in the ground]] is simulated during the calculation. ...[[Ground flow formula (Water Overlay)|groundwater flow]], no [[evaporation model (Water Overlay)|ground evaporation]].

[[File:Average_overlay_attribute_model.png|thumb|right|Attribute model selected in the wizard of the [[Average Overlay]]]] Attribute model is an option in the Average Overlay wizard. Choosing this option configured

[[File:Distance_overlay_attribute_model.png|thumb|right|Attribute model selected in the wizard of the [[Distance Overlay]]]] Attribute model is an option in the Distance Overlay wizard. Choosing this option configure

[[File:Distance_overlay_grid_model.png|thumb|right|Grid model selected in the wizard of the [[Distance Overlay]]]] Grid model is an option in the Distance Overlay wizard. Choosing this option configure

...ght brush]] is used in live sculpting mode, modifications to the elevation model are visualized as you draw them, where you draw them. Applying the modifica {{howto|title=modify the elevation model in live sculpting mode

[[File:Average_overlay_grid_model.png|thumb|right|Grid model selected in the wizard of the [[Average Overlay]]]] Grid model is an option in the Average Overlay wizard. Choosing this option configures

|description=Load the [[Elevation model (Water Overlay)|DEM]] at twice the resolution. ...ation step, so the interpreted [[Elevation model (Water Overlay)|elevation model]] becomes more accurate. This improves flow throughput in very small channe

...still add the heights of any [[Building]]s present, in accordance with the set [[design flood elevation m (Water Overlay)|DESIGN_FLOOD_ELEVATION M]]. |notes=* '''IMPORTANT''': This prequel Overlay must be set to [[How to set an Overlay to active or inactive|inactive]] in order to function properly!

[[File:Distance_overlay_attribute_model.png|thumb|right|Attribute model selected in the wizard of the [[Sight Distance Overlay]]]] Attribute model is an option in the Sight Distance Overlay wizard. Choosing this option con

When working with the [[Ground model (Water Overlay)|complete groundwater model]] of the [[Water Overlay]], it is very likely that any initial configuratio ...he Water Overlay has the [[Ground water (Water Overlay)|groundwater mode]] set to "Complete".

{{howto|title=set linear rain and simulation time |Set the "Rain over Time" setting to "Linear".

...Overlay)|crops and foliage]], allowing it to draw water from the [[Ground model (Water Overlay)|ground]] and [[Ground evaporation formula (Water Overlay)|e ...in]] in the same location. To model ground evaporation without a Building, set the attributes of the Building on the applicable terrain type instead.

* [[Elevation model (Water Overlay)]] * [[Surface model (Water Overlay)]]

...ibutes|type=row|attribute=POPUP_TYPE|unit=nominal value|description=The 3D model of the [[Panel]]'s [[Popup]] and its top-down counterpart. Multiple models ...* When the popup type is set to an undefined nominal value, the "Approved" model is used.

...ta, which defines a number of environmental circumstances the hydrological model is subject to. It also defines the (total) simulation time. Rain is a consistent addition of water to the hydrological model over a specified period of time. At the end of the rainfall's duration, the

...only'''. In case the [[Ground water (Water Overlay)|ground water mode]] is set to '''Complete''', this prequel is ignored. *[[Infiltration model (Water Overlay)]]

...height offset of all bridges to 0 to remove their impacts on the elevation model.]] | Set the filter to "BRIDGE"

Groundwater levels in the Water model can be initialized using a Overlay [[Prequel]]. ...s set to '''complete''', meaning the [[ground model (Water Overlay)|ground model]] is vertically and horizontally fully active.

...fore re-evaluating the Weir height is configured using the Water Overlay's model attribute [[Weir move interval s (Water Overlay)|WEIR_MOVE_INTERVAL_S]]. * This value is set as a single value, not an array.

* UPDATE: We recommend to add texture or color to your model for better visibility, and to use SRID 28992 (Amersfoort - RD) as projectio ...red to be able to use extensions. This extension converts the [[SketchUp]] model into a proper CityGML file. There are also other plugins available, such as

...be configured in the Simulation Settings step, when the surface water mode set to '''Avg Terrain'''.]] |description=With the surface water mode set to '''Avg Terrain''', identified water average areas can be extended to inc

* This Attribute is by default set to 0 which means the [[Surface level prequel (Water Overlay)|SURFACE_LEVEL] * When set to 1 the SURFACE_LEVEL prequel is relative height.

...be configured in the Simulation Settings step, when the surface water mode set to '''Avg Terrain'''.]] ...only used when the [[Surface_water_(Water_Overlay)|surface water mode]] is set to '''Avg Terrain'''.

[[File:Distance_overlay_grid_model.png|thumb|right|Grid model selected in the wizard of the [[Sight Distance Overlay]]]] Grid model is an option in the Distance Overlay wizard. Choosing this option configure

[[Building]]s representing crops and foliage can draw water from the [[Ground model (Water Overlay)|ground]], allowing it to [[ground evaporation formula (Wate ...in]] in the same location. To model ground evaporation without a building, set the attributes of the building on the applicable terrain type instead.

...Overlay)|crops and foliage]], allowing it to draw water from the [[Ground model (Water Overlay)|ground]] and evaporate it. ...in]] in the same location. To model ground evaporation without a Building, set the attributes of the Building on the applicable terrain type instead.

...ugh the principle is similar, the [[How to add a static grid-based traffic model|steps for importing grid-based data]] are slightly different. | Set the [[Average Overlay]] to look for the previously noted [[Attribute]] for

...rlay]] wizard, when the [[Ground water (Water Overlay)|ground water mode]] set to '''Complete'''.]] ...onfigurable when the [[Ground water (Water Overlay)|ground water mode]] is set to '''Complete'''.

...ased on [https://ruimtelijkeadaptatie.nl/stresstest/bijsluiter/hitte/ RIVM Model]. * Option to set the project local timezone.

|description=With the surface water mode set to Grid Averaging, identified water average areas can be extended to includ File:Wateroverlay_avg_shore_width_3m.png|[[Water Overlay]] set to [[Surface water (Water Overlay)|Grid Averaging Waterways]] and a configu

...turation, temperature, atmospheric pressure, etc. By default the factor is set to 1. ...n is active when the [[Ground_water_(Water_Overlay)|Ground water mode]] is set to '''Complete''' or '''Infiltration Only'''.

...establish a link between [[Attributes]] that an [[Overlay]]'s calculation model requires and [[Attributes]] the users and geo-sources supply. The Overlay Weir Height '''Key''' can be set to ''HEIGHT_OBJ''.

...ROWN_FACTOR. This calculation can be superseded when the [[Heat Overlay]] (set to use the [[DPRA Heat Module]]) is configured to use either [[Area]]s or a * [[Foliage height calculation model (Heat Overlay)]]

Tracers can be modeled in the hydrological model, as quantities dissolved in water and transported by flowing water. The tracer model can be activated and deactivated by adding or removing the [[Tracer ABCD (W

Crops and foliage can draw water from the [[Ground model (Water Overlay)|ground]], allowing it to [[Ground evaporation formula (Wate ...in]] in the same location. To model ground evaporation without a Building, set these attributes on the applicable terrain type instead.

: <math>B_c</math> = the datum height of the surface of cell c, set by the [[Elevation (Water Overlay)|elevation]] or a [[Terrain elevation pre : [[Surface model (Water Overlay)]]

Custom geometry store data in a float array. The data stored is a set of triangle definitions: ==3D Model of Buildings==

...ctor will get a sewer area. If you want sewer areas in every neighborhood, set this value as high as possible. |Set the desired [[Sewer storage (Water Overlay)|amount of storage]] for the sew

...nd the [[Travel Distance Overlay]], it is possible to create a calculation model for valid evacuation routes in the event of a water calamity. | [[How to set linear rain and simulation time (Water Overlay)|Set the amount of rainfall of the Rainfall Overlay]] to a total of 60mm in 60 m

...|300px|thumb|right|The Weir removed, as it would have had no effect on the model.]] ...of the [[limit area (Water Overlay)|calculation area]], or being [[border model (Water Overlay)|too close to the edge of the project area]].

...tions by using a [[Combo Overlay]] to precompute the resulting [[Elevation model]], and setting the result as the [[Terrain elevation prequel (Water Overlay | Add a [[Heightmap Overlay]], set to DTM mode.

...ecific variation on the regular [[brush]], optimized for drawing elevation model modifications. It allows for two drawing modes: selection drawing, which us ...sh features a number of options to configure how to (re)draw the elevation model.

...rtable_result_type_(Water_Overlay)|water table result]] of a Water Overlay set to '''include''' the surface for the ground watertable. ...tertable_result_type_(Water_Overlay)|water table result]] of Water Overlay set to '''exclude''' the surface for the ground watertable.

...ore this water indefinitely, slowly remove the water from the hydrological model, or let the water flow in a controlled fashion back onto the surface. Sewer ...assume there is an appropriate amount of water present in or added to the model for the sewer to function in a relevant capacity.

|description=Specifies the mode by which bridges are include in the elevation model, used for the water calculations. ...alculations. This setting defines how to include bridges in this elevation model:

...ionary calculations, you would expect the amount of water flowing into the model to roughly balance the amount of water being removed from the water as well | Set the primary Overlay to surface last value.

|notes=* This prequel allows you to set more realistic bottom distances compared to the single [[Ground bottom dist * [[Ground model (Water Overlay)]]

For the purposes of this scenario, a simple hydrological model will be assumed, with an inflow of water from an upstream source and a down ...ou have a [[Basic water model use case (Water Overlay)|basic water model]] set up. For the specified scenario, the [[Rainfall_(Overlay)|rainfall overlay]]

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to COMPLETE. * [[Ground model (Water Overlay)]]

...ay]] wizard when the [[Ground water (Water Overlay)|Ground water mode]] is set to '''Complete'''.]] * [[Ground model (Water Overlay)]]

The [[elevation model]] defines the height of the terrain on and in which the hydrology is modele ...with water depths, or [[terrain height brush|manually modify the elevation model]].

..._MS has been removed, this variable is calculated by the model, no need to set it anymore.

* When using the [[API]], this attribute can be set for a Average Overlay using the default key '''KEY'''. * [[Attribute model (Average Overlay)]]

For the purposes of this scenario, a simple hydrological model will be assumed, although the same technique can be used for [[Water Overla ...ou have a [[Basic water model use case (Water Overlay)|basic water model]] set up. For the specified scenario, the [[Groundwater_(Overlay)|ground overlay]

...Inlet}} is equal to or greater than the threshold. If the threshold is not set, the amount of water flowing in is not limited in this fashion.

...{{Inlet}} is equal to or less than the threshold. If the threshold is not set, the amount of water flowing out is not limited in this fashion.

* It is possible to set this value anywhere between 1 to 1000. {{SubsidenceOverlay model attribute nav}}

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to COMPLETE. * [[Ground model (Water Overlay)]]

...weir with a width set to 5, for a Water Overlay with a weir dam multiplier set to 3, will have a generated dam with a width of 15. {{WaterOverlay model attribute nav}}

* Added the option to set the simulation start year. * Added more configurable Climate model parameters to the wizard.

|Choose the [[Heat_DPRA_Module|DPRA model]] |In the [[Function_Value|Function values table]] that pops up, set the category filter on Nature and the group filter on Environment to see th

* It is possible to set this value anywhere between 1 to 1000. {{SubsidenceOverlay model attribute nav}}

...calculation model (Heat Overlay)|Shade]] and [[Sky view factor calculation model (Heat Overlay)|Skyview]] calculation models. ...eclining foliage height. The linear decline is 1:1 and currently cannot be set to a different decline. See the image below.

...flow and aquifers|horizontal flow]] in the ground layer. Additionally, the model also applies a simplified form of exfiltration of water from the soil back ==Multi Layered model==

|notes=* The value can be set either as a relative height or datum height with attribute [[Prequel_surfac *[[Surface model (Water Overlay)]]

...rlay wizard when the [[Ground water (Water Overlay)|ground water mode]] is set to '''Complete'''.]] {{WaterOverlay model attribute nav}}

..., groundwater flow and hydraulic structures. This module simulates a water model for your project area, based on rainfall, breaches and existing open water. The Water Module enables users to implement a water model for their project which is accurate and delivers fast results. To ensure ac

An Attribute can be set to a list of values by entering the desired numeric values separated by spa * TQL update statements can set attributes to arrays of values.

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to COMPLETE. * [[Ground model (Water Overlay)]]

...ces|Basisregistratie Gewaspercelen (BRP) Source]] will have this parameter set for the agricultural land use. {{WaterwijzerOverlay model attribute nav}}

...ce of data which can be modified or removed at will, leaving the elevation model as close to the original data as possible. | Set the value of the Attribute to the previously determined terrain height.

...ation on this topic, see: [[Breach model (Water Overlay)#Input Area|Breach model (Water Overlay)]] |Set the values of [[External area (Water Overlay)|external area]], [[External w

* [[How to set custom timeframes]] {{WaterOverlay model attribute nav}}

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to COMPLETE or INFILTRATION_ONLY. * [[Ground model (Water Overlay)]]

..., it is possible to import this data as part of the DEM (Digital Elevation Model). Together with importing your water level areas, the volume of the waterbo ...to set the resolution. Choose the same resolution the current [[elevation model]].

*[[How to set dynamic breach height]] * [[Breach model (Water Overlay)]]

* Fixed several 3D Model visualizations. * Option to set the CRS for Events.

{{editor steps|title=set up pre-initialized water levels and use them in a water calculation. | Add [[Water area (Water Overlay)|Water Area]]s to the [[Project]] to set initial water levels.

* Added option to set Elevation Model based on Grid Overlay.

: <math>B_c</math> = the datum height of the surface of cell c, set by the [[Elevation (Water Overlay)|elevation]] or a [[Terrain elevation pre : [[Ground model (Water Overlay)]]

[[File:Api_current_situation_geography.png|thumb|right|400px|[[Elevation model]] in relation to [[Terrain]]s, [[Height sector]]s and [[Elevation GeoTIFF]] ...et to a fixed price. After the ground price for buying and selling land is set in the editor, users can even negotiate and adjust the ground price later o

...tal.png|thumb|Image of the [[Evaporation model (Water Overlay)|evaporation model]] in the [[Water Module]]]] * The default value is set to 0.125 mm in 2 hours (0.000125 m in 7200 seconds), which corresponds to '

...d time units and click on ''Ok''. The data in the CSV files is now used to set the attribute for the structures dynamically. }} ...oftware}} then automatically converts the time to the correct data for the model.

...a [[Session]], are collectively referred to as the {{software}}'s traffic model. {{anchor|static traffic model}}

...rid Overlay]] which serves as input for another (geographical) calculation model, overriding [[Key]]ed [[Attribute]] feature values. ...is then [[rasterization|rasterized]] to provide input for the calculation model. For a number of calculation models, it is possible to configure a Prequel

...hing between [[Water (Terrain Attribute)|land and water]], the [[elevation model]] is altered automatically based on the [[Terrain Type]]'s [[Attributes]]. ...ibute]]s can be used to prepare a GeoJSON file, with which the [[elevation model]] can be altered. Each [[Attribute]] is effectively optional.

...uilding functions as an outlet, and water is removed from the hydrological model. ...tion step is characterized by an amount of time that elapses. Based on the set flow rate, it is then calculated how much water is added in that time step.

...er than Grid, all MapLink layers are considered. When the MapLink layer is set to a specific MapLink, only that type of data is rasterized. ...of averaging is defined by several [[Attribute]]s, and can most easily be set using the ''Average Overlay Wizard''.

* [[How to set custom timeframes]] {{WaterOverlay model attribute nav}}

* The minimum calculation grid size is set to 5x5m, although larger [[Grid_Overlay#Grid_size|Grid Cell]]s are still po * The [[elevation model]] is automatically set to a resolution of 10m.

...vert" issue. Maximum distance between land and culvert for this to work is set using the attribute CULVERT_DEM_THRESHOLD_M, default 10m. * Fixed issue where water structures are incorrectly set when data changes.

Water can evaporate from the hydrological model, varying per grid cell and over time. Multiple types of evaporation are imp ...ing which a certain rate of evaporation will take place, similar to [[rain model (Water Overlay)|rainfall]]. Multiple evaporation periods can be defined.

When working with the [[Ground model (Water Overlay)|full groundwater model]] of the [[Water Overlay]], ground bottom flow from deeper ground layers th | Set the Global pressure to "dynamic", and opt to select a csv.

...Foliage_height_calculation_model_(Heat_Overlay)|Foliage Height Calculation model]]. ====Now that we have a point data set in which each tree is known as a loose point, to which the tree height and

...st value of the defined breach height array. This means that the elevation model immediately has a "hole" where the breach can potentially be. The breach he *[[How to set dynamic breach height]]

: <math>f_1</math> = Material factor, set to 1.3 (average for sand and clay levees). : <math>f_2</math> = Constant, set to 0.04.

| Set the primary Overlay to surface last value, the base overlay to surface elev | Set the Measurement graph display mode to "fit to graph".

* This Attribute is by default set to 2 which means object correction is applied. {{WaterOverlay model attribute nav}}

...should, for the most part, be able to flow naturally. However, as with any model, at some point the [[Water Overlay]] has an edge, leading to partially unex ...is at the border of a [[water area (Water Overlay)|Water Area]]. If it is set to specified areas only, check whether the location of the issue is at the

[[File:Api_current_situation_geography.png|thumb|right|400px|[[Elevation model]] in relation to [[Terrain]]s, [[Height sector]]s and [[Elevation GeoTIFF]] An elevation model (or DEM, Digital Elevation Model), is a model representation of terrain heights; the quantitative measurement of vertical

...idual tree is loaded in as a singular polygon, their evaporation factor is set properly. However, when an entire forest is loaded in, the entire forest is * [[Evaporation model (Water Overlay)]]

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to COMPLETE. * [[Ground model (Water Overlay)]]

...ew project wizard - project template.jpg|thumb|left|New Project Wizard, to set the new [[Project]]'s properties.]] A new [[Project]] will require geographical properties to be set, known as the [[project area]]. This includes the size of the [[Project]] a

{{Editor steps|title=set a dynamic infiltration factor for a Water Overlay |Set the [[Infiltration factor s (Water Overlay)|infiltration factor s]]' mode t

...f the water overlay, you must first set up a basic water model. This water model includes both your hydrological system, as well as the parameters used to p |Water areas set the water level of all open water within their boundaries.

...re an area is already seriously flooded, or where an area of land which is set up to be used as a water buffer or emergency water retention has already fi * [[Surface model (Water Overlay)]]

...from Blender first. Therefore, this article deals with exporting a Blender model to [[CityJSON]] so that it can be imported into the Tygron Platform via the ...ped for the needs of their MSc thesis 'An integrative workflow for 3D city model versioning'.

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to INFILTRATION_ONLY, or to COMPLETE. * [[Ground model (Water Overlay)]]

...d impact of (heavy) rainfall over the project area. Based on the elevation model, terrain roughness and representations of the sewer and water systems, seve ...r Module performs two dimensional grid based water simulations for a large set of input data and parameters, configured mostly through a related [[Water O

...type requires the [[Ground water (Water Overlay)|Ground water mode]] to be set to INFILTRATION_ONLY, or to COMPLETE. * [[Ground model (Water Overlay)]]

...ter and time units and click on ''Ok''. The data in the CSV is now used to set custom timeframes. }} ...oftware}} then automatically converts the time to the correct data for the model.

* New SOLID attribute defines whether building is part of Surface Model height-map. * Admins can now set two-factor authentication per user level.

..., the demand of the cluster would be 320. When a connected fraction is not set for a cluster specifically, the general setting is used. ====Calculation Model====

The subsidence model calculates the gradual downward settling of the ground's surface where a pe The calculation model is configured by the subsidence overlay wizard and it's result are visualiz

...y for their computed groundwater levels, it's possible to set up a dynamic model in which actions can directly influence the viability of crops, and thus th * The [[Water Overlay]] is set to [[Ground water (Water Overlay)|fully simulate groundwater flow]]

...ter and time units and click on ''Ok''. The data in the CSV is now used to set the attribute dynamically. ...oftware}} then automatically converts the time to the correct data for the model.

...both for functionalities such as the generation of the default [[elevation model]], as well as for calculation models ranging from the Average Overlay to th ...rawn on top of the existing [[Terrain]]. However, all Terrain Types have a set texture which will be shown in any location where the [[Terrain]] is change

This indicator is a simplified version of a RIVM calculation model and was created for a pilot with the RIVM.  The indicators in this pilot ...ad on to find out more about the indicator's calculation method and how to set it up in your project.

...ter evaporation (Function Value)|Water evaporation function value]] can be set as four [[Season formula (Water Overlay)|seasonal values]]. : <math>B_{c}</math> = the datum height of the surface of cell c, set by the [[Elevation (Water Overlay)|elevation]] or a [[Terrain elevation pre

: <math>B_c</math> = the datum height of the surface of cell c, set by the [[Elevation (Water Overlay)|elevation]] or a [[Terrain elevation pre : [[Ground model (Water Overlay)]]

|Configure the Overlay with a [[Basic water model use case (Water Overlay)|basic hydrological system]]. |For each breach, [[How to set dynamic breach height|configure a dynamic breach height]].

...ing to the weir threshold level. When it is adjusted, a moment in time is set for that weir, during which it cannot be adjusted. * <math>f_{dw}</math> = Dutch weir factor, set to 1.7.

|[[Model Data]] |[[Model Set]]

| Make sure the format is set to csv |Now go to File and save this sheet to a csv. Make sure the format is set to ''.csv''.

...e selected area. Find an overview on which data is used to create a new 3D model on the [[Project Sources]] page. ...ta sources that should be used by default when using this template, can be set. For example AHN3 can be selected so that the AHN3 is always used when crea

...average background-concentration (default = 0 [μg/m3]). ''Configured using model attribute [[Base no2 (Traffic NO2 Overlay)|BASE_NO2]].'' : <math>a</math> = configurable using model attribute: [[Road1 30m a (Traffic NO2 Overlay)|ROAD1_30M_A]]

...[grid cell size]]. Secondly, water is initialized in the model. Finally, a set of rules is required that describes the behavior of the flow. In the model, imbalances in the water surface elevation across the grid drive the flow o

...draulic structures. Depending on the use case, the simulated period can be set to few seconds and up to a few months. The [[Water_Module_Theory|theory]] s ...building may also have attributes which can contribute to the hydrological model in some way. These attributes are stored and used on a grid cell level. Thi

...ation on this topic, see: [[Breach model (Water Overlay)#Input Area|Breach model (Water Overlay)]] ...ke sure that the [[Attribute]] you add to the Area has the name the key is set to.

===Calculation model steps=== ...ep8.png | A calculation cycle is repeated for each year the simulation is set to compute.

...rea]] that has the [[key]] [[Breach height (Water Overlay)|BREACH_HEIGHT]] set. Its base are is defined by the geometry of the breach area. The breach is When using an external source, it is quite easy to set up. This setup is useful when there is a large body of water that does not

===Calculation model=== ...Popup. Stakeholders will not notice anything of the underlying calculation model, except for its results (e.g., changing traffic intensities).

...most overlays that can be added to a project use an underlying calculation model, which rasterize the spatial data and apply calculations to it to produce v Every Overlay is considered a Parent Overlay, unless it has a Parent Overlay set, in which case it becomes a Child Overlay of that Parent Overlay. Overlays

{{main|section=section|Ground water data model|Ground water}} ...his is only a relevant configuration when the {{inlink|lcase=1|Underground model}} is active. A ground water GeoTIFF is optional. If no ground water tiff is

It is possible to set up a dynamic rainfall definition, which allows for the amount of rainfall p ...s be larger than the previous time key. <!--Otherwise the rain calculation model will stop applying rain from the moment it reaches that time key.-->

: In a start-up meeting we discuss your learning objectives and set the details of the program for the quickstart training day. Possible subjec :* How to build a 3D dynamic model?

...for visualization of the traffic density calculations (See also: [[Traffic Model]]) of the various types of roads. For example, a highway has more units per ...nit has its own properties consisting of its name, color and whether it is set active in the [[project]].

...type of data and multiple types of data are supported. Geo plugins can be set active or inactive manually before generating the new project by opening th ...can map attributes for the matched feature. The geometry mode can also be set, which optionally alters the feature's geometry.

The Stowa 2017 [[Water Module benchmarks|benchmark]] was set up in order to find out which tool currently available to the Dutch Water m ...se note that the referenced document contains results made in 2017, with a model that was not yet using the 2D Saint Venant equations.

...to function. Although this works perfect it depends on the variable to be set correct. We have adjusted the algorithm to handle this internally and there

| Set the Building's [[Function]] to either "Active Drainage" or "Passive Drainag ...water actually still only flows with the speed the underground allows. To model this most accurately, the individual drainage tubes should be represented b

...r flow to the configured accuracy. The only way to enhance the [[elevation model|heightmap]] accuracy is to load in a new [[Project]] with a more detailed [ | auto=A fix is proposed to provide a value to set the [[Water_level_(Water_Overlay)|water level]] to a specific height below

...al equivalent temperature]] result type. It uses a different (and smaller) set of formula's to calculate Heat differences than the [[DPRA_Heat_Module|DPRA The calculation model behind the Heat stress overlay is from UNESCO-IHE. More information, includ

...hlighted. For example, if [[building]]s are highlighted with the [[Traffic Model|TRAFFIC_FLOW]], it will display the name of the building, some information ...Visualization. Note that this will be overwritten if a color attribute is set. The "Background Color" is the color used to color all other areas. You can

...tion Value|properties]] of [[Building]]s. A Function also references which model sets and colors are used in the 2D and 3D visualization. A Function is effe ...different owners. But Buildings with the same Function will have the same set of [[Function Value|properties]] defining their economic, environmental, an

| The [[Building style|model style]] of the [[building]]'s in the [[3D Visualization]]. | A setting that is set by the {{software}} to indicate this project required a recalculation.

...t case. Instead water flow is provided by inlets and outlets, which can be set up either variable or constant. *Model grid resolution: 1m

...jpg|350px|frame|center|The traffic noise overlay is a standard calculation model.]] ...ny significantly relevant results. This is because no inputs have yet been set, nor has a relevant formula been entered.

...waterwijzer' />. Because the {{software}} connects to the same calculation model, the same input should also lead to the same output. ...tion directly configured through [[Area]]s and [[Attribute]]s so that it's set to a specific value.

...e section {{inlink|Variations}} for other examples and inspirations how to model your distance calculations for your own use cases. The second use case is a ...uous trees within 20 meters of the water edge. It is currently possible to model this calculation. It requires the following:

Ensure the duration of the simulation is set to a timespan suitable for the intended use-case, but not longer than neces Ensure the grid cell size is set small enough that any significant waterways in the [[Project area]] are at

...alization diameter, are inherited by their net lines. This allows a single set of properties to be applied to all lines in the network. ...e net type]]. Depending on the [[Net_Setting#Calculation_Model|calculation model]] for networks, this attribute is used in resource flow calculations.

...er Overlay)|Ground water head]] <math>h_{v}(t)</math> can be provided as a set of values that variate over time. : [[Ground model (Water Overlay)]]

=== Step 1: Select model === ...ep 1 you can choose either the new (more accurate) [[Heat_DPRA_Module|DPRA Model]] or the [[UNESCO Heat Module|UNESCO Heat stress module]] that was used in

...arget is divided in types of buildings. Per building type, a target can be set. Based on the type of building you either fill out the number of houses or ...the [[top bar]]. A new panel opens up and here you see the target you have set and the description you could enter in the right panel.

This indicator is a simplified version of a RIVM calculation model and was created for a pilot with the RIVM.  The indicators in this pilot ...ad on to find out more about the indicator's calculation method and how to set it up in your project.

...ignment we are going to import two fictional datasets as objects in the 3D model. ...ping on. We do not have to create rules for every attribute, since we have set a default function. Think of what would happen if we had another feature in

== How to set up the Heat Overlay Wizard == ...Foliage_height_calculation_model_(Heat_Overlay)|foliage height calculation model]] will determine the foliage height using the height of the vegetation (as

On a per-file and per-directory basis, it is possible to set a required access token. Although to access a file or directory a url must | [[GeoTIFF Overlay]], [[Elevation model]], other grid data

...stand the functioning of indicators better it can be useful to look at the set-up of other similar indicators, the Green Garden indicator was inspired par ...and a minimum floor height of 2m. This floor height was obtained from the model, by making an [[Average_Overlay|Average Overlay]] based on the [[Floor heig

=== Step 1: Select model === ...ep 1 you can choose either the new (more accurate) [[Heat_DPRA_Module|DPRA Model]] or the [[UNESCO Heat Module|UNESCO Heat stress module]] that was used in

...hich the end-user can click to open the panel. You do this by clicking on “Set Point” in the right panel, and then using the brush to select a location ===Configure panel model, visibility, and attention===

...he introduction screen: Setup Water System. In the following steps we will set up the water system using the prepared GeoJSONS. [[File:Kockengen_figure05B * Import Water Areas: allows you to import a set of water areas

*Model grid resolution: 10m (or 700 nodes in the area modeled) * Time of end: the model is to be run until time t = 20 hours

In a water system model, the waterways generally catch the rainfall and transport it elsewhere, oft **[[Elevation model]].

<gallery caption="Tygron Model showing the current situation in Hoefkade (scenario 0)" mode="packed-overla File:basemaphoefkade0.png|Tygron model showing the neighbourhood

To do that, the lecturer and the teaching assistant have created a model case study based on the Champs-Elysées area in Paris using the Tygron plat They called the model the "Paris Game". It is inspired by an existing redevelopment plan of the P

...ensity is a function value which affects calculations related to [[Traffic Model|traffic]]. Some use-cases require these values to be updated dynamically. T ...of [[Rainfall (Overlay)|inundation]] has the ID 4, and has its result type set to water stress.)

Each calculation relies on some data, which may be set as properties or attributes of the overlay, or may be based on the features With all the data obtained, a new values or set of values is calculated for the cell, and stored as result data for that ce

...ate a new, empty project, sized to 500m by 500m. Ensure the unit system is set to "International". Also ensure it's an empty project area, not based on a * There is a uniform height map, with the height of the terrain set to 1m relative to {{datum}}.

* Model grid resolution (m): 5 (or ~80,000 nodes in the area modeled) * Raster grids (or TIN) at the model resolution consisting of:

Make sure “Apply Template on” is set to “NEIGHBORHOODS”, and click on “Apply Template”. You will get a n ...e the same as the properties of the Template Excel panel. For example: the model, whether it requests attention or not, to which stakeholder it is assigned,

...course was compromised because the course-assignment has not been properly set up, or because students ran into hardware problems. ...ical manual designed to help the lecturers get a grip of what is needed to set up a successful course that could be delivered repetitively for multiple ye

Networks are a separate data layer in a [[project]], intended to model actual resource transport networks, such as for gas, heat, and internet. Th [[File:network-right-electricity-active.jpg|350px|frame|center|Set the network to be active.]]

*#Delft3D Flexible Mesh hydrodynamic model *#the BIOSAFE biodiversity model

...epressions with smooth topographic transitions. The DEM (digital elevation model) was obtained by multiplying sinusoids in the north to south and west to ea ...e of ~85 minutes was implemented according the hydrograph in Fig. (b). The model was run for 2 days (48 hours) to allow the inundation to settle to its fina

Set the [[Project]]s language to the desired language, the currency to the desi Permissions can be set for:

* Also an option to import an elevation model. * Option to set and remove attributes for all Areas at once. And option to create border ar

...ttention}}, and the {{linkappend|post=&nbsp;(Panel Attribute)|popup type}} model used to display the [[Popup]] of the [[Panel]] in the [[3D Visualization]]. ...nbsp;(Panel)|Answer}} will automatically have the value for that parameter set to the [[Item]] which the instance is related to. For example, if the Templ

* [[Foliage height calculation model (Heat Overlay)]] * [[Shade calculation model (Heat Overlay)]]

Next, a location can be set for the project. ...and height. This can only be done once. When the map size has already been set it cannot be changed.<!--TODO:EditorGeoOptions?-->

Ensure the query type is set to "SELECT", which means to request data from the Project. Ensure the statement is set to "LANDSIZE", which is a request for surface area.

...re are parts which are not covered by data to properly initialize water or model all possible routes for water to flow through. The project has been configu ...lated, and the new results will indicate how water would act with the weir set to its new height. To compare the original results and the new results, sel

|Zoom in op het gebied waar je een 3D model van wilt creëren. Optioneel, pas de grootte van het vierkant/de rechthoek ...dat verschijnt de waarden in zoals in de afbeelding hieronder en klik op ''Set value'' om de peilen allemaal een rode kleur te geven.

Based on our previous research on the issue of TDR in the Lower East Side, we model LES + NYCHA campuses, taking into account the various zoning restrictions. ...eeds to remain on the topic of TDR, rather than focusing on an arbitrarily set score for stakeholders.

The {{software}} uses spatial data sets from different sources. If this data set contains information that can be retrieved with a [[TQL|query]], a dedicate *[[How to create an Excel background calculation model]]