Search results

...]], after which calculation models which rely on traffic data can use that data as input. These steps assume the data is available as a [[GeoTIFF]]. Other [[grid]] data can be similarly added to a [[Project]].

* New system for loading Elevation Model data from GEO sources, like the AHN. This speeds up the Wizard process and also ...tion to select if you want to use the AHN data when creating the Elevation Model. Using the AHN creates extra detail but also a less smooth map.

...]], after which calculation models which rely on traffic data can use that data as input. ...ow to add a static grid-based traffic model|steps for importing grid-based data]] are slightly different.

Traffic Overlays make use of a number of common types of data. ...butes (Traffic Overlay)|Attributes of the Traffic Model]], dictating which data to include and compute for the respective calculations.

* Your data consists of vector data, either: * Your data has, per feature, a single [[Attribute]] indicating the desired depth of th

{{howto|title=|Open the [[Geo data wizard]] |In the next step, either choose the height defined in the model (datum height) or place the models on top of the [[Elevation_model|terrain]

* [[Wind calculation model (Heat Overlay)]] * [[KNMI Weather data]]

The content of the height map is determined by the height data stored in [[Height Sector]] items. Height data is obtained from or adjusted with:

* [[How to import a 3D model in ArcGIS Pro]] * [[How to import a SketchUp model in ArcGIS Pro]]

Groundwater levels in the Water model can be initialized using a Overlay [[Prequel]]. ...s set to '''complete''', meaning the [[ground model (Water Overlay)|ground model]] is vertically and horizontally fully active.

...ations for themes like [[Water Overlay|water flow]] or [[Shade calculation model (Heat Overlay)|shade]]. |Open the [[Geo data wizard]]

* [[KNMI Weather data|KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

...and therefore coordinates). Thus basically when the data is [[Geo_Data|Geo data]]. ...how you have your data available, as vector or raster data and/or what the data represents.

...ation research group, TU Delft. This dataset contains 3D models of the BAG data in different LoDs. |Go to the download page of the 3D BAG data: https://3dbag.nl/en/download and click on Pick a tile.

At the start of the calculation, the following data is pre-calculated for each cell: ...foliage height calculation model (Heat Overlay)|foliage height calculation model]] is used to calculate the [[Foliage result type (Heat Overlay)|foliage hei

''A static model does not change (over time), when changes occur in the [[project]]. ...2030 ready that contains the traffic intensities then and want to use this data in your project.

'''How can I change the texture, color or shape of a 3D model? ...rancisco project, you have to change the [[SLPK]] data file and import the data again in to the {{software}}.

...some corrections to have the data properly interpreted by the calculation model. ...the inherent complexity which may be involved with various combinations of data, for some situations only advice on how to investigate a potentially errone

Below the steps on how to import a SketchUp model from the [https://3dwarehouse.sketchup.com/?hl=nl 3D warehouse from SketchU {{editor steps|title=import a SketchUp model from the 3D warehouse in ArcGIS Pro

*[[KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

...scription=The depth of the ground water level, relative to the [[Elevation model|surface]] ==Default data==

...scription=The depth of the ground water level, relative to the [[Elevation model|surface]] ==Default data==

|Prepare a [[GeoJSON]] file with the desired data for the [[Sewer area (Water Overlay)|sewer area]]s, most importantly the [[ |Select the 'import' option. This will open the [[Geo Data Wizard|Geo data wizard]].

|description=Whether to use foliage data from [[Area]]s instead of the calculated foliage decks from functions with *[[Foliage height calculation model (Heat Overlay)]]

{{Editor steps|title=import terrain height data |Your original DTM is replaced by the GeoTIFF where the GeoTIFF data overlapped with the project area.

* [[KNMI Weather data|KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

...a [[Session]], are collectively referred to as the {{software}}'s traffic model. ==Data==

...evant for roads, intersections, and bridges. This is part of the [[traffic model]], in turn affecting the calculations for the [[Traffic Overlay]]s. | overwritten=based on data in the [[Project Sources|NSL]].

...evant for roads, intersections, and bridges. This is part of the [[traffic model]], in turn affecting the calculations for the [[Traffic Overlay]]s. | overwritten=based on data in the [[Project Sources|NSL]].

...evant for roads, intersections, and bridges. This is part of the [[traffic model]], in turn affecting the calculations for the [[Traffic Overlay]]s. | overwritten=based on data in the [[Project Sources|NSL]].

...evant for roads, intersections, and bridges. This is part of the [[traffic model]], in turn affecting the calculations for the [[Traffic Overlay]]s. | overwritten=based on data in the [[Project Sources|NSL]].

...ore this water indefinitely, slowly remove the water from the hydrological model, or let the water flow in a controlled fashion back onto the surface. Sewer ...assume there is an appropriate amount of water present in or added to the model for the sewer to function in a relevant capacity.

* No data values are not allowed. |seealso=*[[Surface model (Water Overlay)]]

* No data values are not allowed. |seealso=*[[Surface model (Water Overlay)]]

GeoTIFF is a file format for geographical raster data. It is an image file format containing additional Geo metadata, such as the ...import_a GeoTIFF to change the elevation model|Changing]] the [[Elevation model]] of the current situation of your project.

...n height brush]] is used in selection mode, modifications to the elevation model are made in 2 explicit steps. {{howto|title=modify the elevation model in selection mode

A height sector is a data item which store the height data of the [[Elevation model]]. Each height sector is a square tile of 500m x 500m. Height values are st * [[How to change how the default elevation model is generated]]

...for [[3D Visualization]]s or calculations, there are situations where the data from that file should also be included as other [[Item]]s which are entirel {{howto|title=import a CityGML/CityJSON file for 2d spatial data

...between 0m and 100m. No data values are not allowed, although negative no data values will result in a foliage height of 0. {{HeatOverlay model attribute nav}}

...Map and the Data Interoperability extension to prepare and convert the BIM data to another 3D format and then importing this dataset in [[ArcGIS Pro]]. {{editor steps|title=prepare BIM data to import in ArcGIS Pro

...for [[3D Visualization]]s or calculations, there are situations where the data from that file should also be included as other [[Item]]s which are entirel {{howto|title=import a SLPK file for 2D spatial data

...polygons each have an associated [[Terrain Type]], which holds the actual data of what the Terrain polygon represents. Only the [[Terrain Type]] holds any {{main|Elevation model}}

...nes exact heights on the desired reoslution, it is trivial to load in that data. However, sometimes some additional calculations are desired to create or r ...l, by taking the data of the indicated Overlay and adjusting the elevation model accordingly.

...used [[GEO_Data|Geo data]] sets in the project and the by a user imported data. *the number of features in the 3D model (count).

|description=Used for initializing the digital surface model used for this Heat Overlay. ...ues in this prequel grid are clamped between the mentioned min and max. No data values are not allowed. An [[Average Overlay]] can be used to fill in the {

|description=Used for initializing the digital terrain model used for this Heat Overlay. ...ues in this prequel grid are clamped between the mentioned min and max. No data values are not allowed. An [[Average Overlay]] can be used to fill in the {

* [[KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

* [[KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

* [[KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

* [[How to import KNMI weather data into Microsoft Excel]] * [[KNMI Weather data|KNMI Weather data]]

When working with the [[Ground model (Water Overlay)|complete groundwater model]] of the [[Water Overlay]], it is very likely that any initial configuratio ...on ends. To compensate for this, it is possible to prepare the groundwater data by setting up and running a stationary calculation for groundwater, allowin

* [[KNMI Weather data]] * [[How to import KNMI weather data into Microsoft Excel]]

|description=Specifies the mode by which bridges are include in the elevation model, used for the water calculations. ...alculations. This setting defines how to include bridges in this elevation model:

* No data values are not allowed. *[[Surface model (Water Overlay)]]

..._to_the_Tygron_Platform|BAG]] building polygon, we look at the [[elevation model|DTM]] (height points every 50cm). ...et a sharp demarcation instead of fuzzy deviations in an inaccurate height model.

===Dynamic traffic model=== ''A dynamic model changes (over time), according to changes made in the [[project]].

|Choose the [[Heat_DPRA_Module|DPRA model]] |In step 3.1 choose for the option import foliage areas (start geo data wizard).

|Prepare a [[GeoJSON]] file with the desired data for the [[Sewer overflow (Water Overlay)|sewer overflow]]s, most importantl |Select the 'import' option. This will open the [[Geo Data Wizard]].

This prequel serves as a replacement for the DTM, which is the elevation model without the [[Building]]s. The [[Water Overlay]] will still add the heights ...e values in this prequel grid are clamped between -10000.0 and 10000.0. No data values are not allowed.

...hing between [[Water (Terrain Attribute)|land and water]], the [[elevation model]] is altered automatically based on the [[Terrain Type]]'s [[Attributes]]. ==Required data==

When using this prequel for an [[Average Overlay]], Vector data is not rasterized for that [[Overlay]]. * [[Grid model (Average Overlay)]]

The [[elevation model]] defines the height of the terrain on and in which the hydrology is modele ...with water depths, or [[terrain height brush|manually modify the elevation model]].

| demographic= you if you are interested in GIS, BIM, data analysis, 3D visualization, urban planning and architecture | showcases= a 3D city model

...scription=The depth of the ground water level, relative to the [[Elevation model|surface]] ==Default data==

...scription=The depth of the ground water level, relative to the [[Elevation model|surface]] ==Default data==

...ns to visualize 3D data. The Cesium platform follows an open-core business model with open source runtime engines such as CesiumJS. ...ated graphics, and is cross-platform, cross-browser, and tuned for dynamic-data visualization.

...of [[3D Tiles]]. This allows for using the generated [[3D Visualization]] data in other application. | On the API website go to "3D Model Services (3D Tiles)" (api/session/3dtiles.html).

|description=The default value used for a cell when no spatial data overlaps that cell. * [[Attribute model (Average Overlay)]]

.../20-010.html] (last visited 2024-02-07)</ref> is an open standardized data model and exchange format to store digital 3D models of cities and landscapes. It CityJSON is a different exchange format which uses the same underlying data model as CityGML. Both formats can be imported into the {{software}}.

...ing this prequel for an [[Distance Overlay]], Attribute values from vector data are not rasterized. * [[Grid model (Distance Overlay)]]

...n then be more accurately calculated. Below the steps on how to import the data. The steps below assume you have already a digital dataset of your waterdepth data available (no PDF's with sections).

...via two methods: directly as attributes of [[Import Geo data|imported Geo data]], or by importing a [[CSV]] file via the [[Water Overlay Wizard|configurat Time sequences are stored in project data in the form of [[attribute array]]s. It consists of a sequence of pairs of

...ta, which defines a number of environmental circumstances the hydrological model is subject to. It also defines the (total) simulation time. Rain is a consistent addition of water to the hydrological model over a specified period of time. At the end of the rainfall's duration, the

* Includes more checks for valid data (areas, weirs, etc). * Provides possible fixes for invalid data.

...e extend of foliage itself is not generally available as geographical open data. Instead, often only the extent of tree trunks are provided. * Foliage can be [[Foliage height calculation model (Heat Overlay)|calculated]] based on the FOLIAGE_CROWN_FACTOR. This calcula

...le]]'s simulation can be linked to other models, which add and define more data to be used in the simulation. Some models are automatically connected, and ! style=text-align:left; | Underlying data

...ate the 3D [[Buildings]]. This project can serve to further explore the 3D model and its contents. ...e will explore the contents of the 3D model, the used data to generate the model and add a map to analyze the different type of buildings.

...or deselect a data source and change some settings like the resolution of data sources. The changes made in this panel are stored in your [[project]]'s [[ ...e selected area. Find an overview on which data is used to create a new 3D model on the [[Project Sources]] page.

...is prequel for an [[Sight Distance Overlay]], Attribute values from vector data are not rasterized. * [[Grid model (Sight Distance Overlay)]]

...The specification was mainly designed for streaming large 3D visualization data over the web. The specification was originally designed by Esri and was ado Different other formats, such as BIM data or a SketchUp model, can be converted to the I3S format with a SLPK file. Read on to learn more

..., groundwater flow and hydraulic structures. This module simulates a water model for your project area, based on rainfall, breaches and existing open water. ...ecific quantity of water and specific hydrological parameters based on the data in the project. The total time which should be simulated is divided into di

...r other [[Grid Overlay]]s can be configured as prequels for the Subsidence model to initiate [[High ground water level prequel (Subsidence Overlay)|ground w * In case a [[prequel]] is used, respective feature data is ignored. For example, when a [[Clay thickness prequel (Subsidence Overla

|In [[ArcGIS Pro]] go to the "Map" tab and select "Add Data" |Choose the DWG file. If the file is not visible in the add Data panel, click on the refresh button (top right corner)

...SLPK, it has to be imported into ArcGIS Pro and Georeferenced to place the model on the right location.<br> ArcGIS Pro allows different file formats to be i =Requirements on 3D model data=

...-nu/klimatologie-metingen-en-waarnemingen Historical Dutch Weather station data] {{WaterwijzerOverlay model attribute nav}}

...(as calculated in its final [[timeframe]]) are applied to the [[Elevation model]]. The result of that application is used for the entirety of the [[Water O ...Water Overlay]], no subsidence is assumed to be applied to the [[Elevation model]].

Custom geometry store data in a float array. The data stored is a set of triangle definitions: ==3D Model of Buildings==

...e selected area. Find an overview on which data is used to create a new 3D model on the [[Project Sources]] page. ...open datasets is displayed. You can choose to include or excluded specific data sources in your project creation.

...tions by using a [[Combo Overlay]] to precompute the resulting [[Elevation model]], and setting the result as the [[Terrain elevation prequel (Water Overlay ...rd|configuration wizard]], and proceed to the step regarding the Elevation Model.

...ecific variation on the regular [[brush]], optimized for drawing elevation model modifications. It allows for two drawing modes: selection drawing, which us ...sh features a number of options to configure how to (re)draw the elevation model.

This how-to described how to geo-reference a 3D model such that it will be located in the [[project area]]. Below the steps in ArcGIS Pro on how to move the model to the right location and with the right scale on the map.

The [[Heat_(Overlay)|heat overlay's]] model calculations depend on a number of calculation-wide parameters. These param ...ured by measure stations. For any given project, it is recommended to find data from a (reference) weather station applicable to the project area, and use

...)|structure]], [[Hydrological features (Water Overlay)|feature]], or other data you would like to enter a time sequence for. | Optionally, change the delimiter and time units and click on ''Ok''. The data in the CSV is now used to set the attribute dynamically.

...establish a link between [[Attributes]] that an [[Overlay]]'s calculation model requires and [[Attributes]] the users and geo-sources supply. Next, let us assume that the Weir's data is supplied by a user.

...values in this prequel grid are clamped between -1000000.0 and 1000000. No data values are therefore not allowed. * [[Ground model (Water Overlay)]]

...y first rasterizing input values. These values can be obtained from Vector data or a [[Grid Overlay]]. Once [[#Rasterized Vector data|rasterized]], the configured result type determines the operation applied o

* UPDATE: We recommend to add texture or color to your model for better visibility, and to use SRID 28992 (Amersfoort - RD) as projectio ...red to be able to use extensions. This extension converts the [[SketchUp]] model into a proper CityGML file. There are also other plugins available, such as

...of data relevant to a specific area and use-case. Each project consists of data such as: * Spatial features, such as an [[elevation model]], [[Terrain Type]]s, and [[Building]]s.

[[File:Api_current_situation_geography.png|thumb|right|400px|[[Elevation model]] in relation to [[Terrain]]s, [[Height sector]]s and [[Elevation GeoTIFF]] An elevation model (or DEM, Digital Elevation Model), is a model representation of terrain heights; the quantitative measurement of vertical

* [[Ground model (Water Overlay)]] {{WaterOverlay simulation data nav}}

==Preparing and importing drainage data== {{howto|title=prepare and load in drainage data

...tion fraction can be determined based on the presence of multiple types of data: * [[Foliage height calculation model (Heat Overlay)|Foliage Height calculation]]

* New [[Geo Data Wizard]] * Wider support for different online Geo Data sources. For example WFS and CSW. Also GML3 with old GML2 tags are now supp

...such as [[building]]s, [[neighborhood]]s, or [[area]]s, is checked. If the data has the specified attribute, it is highlighted in the [[3D Visualization]] ...mb|250px|left|The hover panel of the attribute overlay displaying building data.]]

* [[Water Model Limits]] (some basic rules) ...the 2D Saint Venant equations (see [[Surface model (Water Overlay)|Surface Model]]). The module is further enhanced with infiltration, evaporation, groundwa

Project sources are the [[Geo Data]] sets that can be used by (geo) plugins to generate and build up a project Furthermore, all the additional data users import into a project are tagged with new Source as well.

|[[Model Data]] |[[Model Set]]

* [[Surface model (Water Overlay)]] {{WaterOverlay simulation data nav}}

...the noise impact. It also takes into account [[Building]]s and [[Elevation model|terrain features]] which would block the transmission of noise. [[File:Traffic_Noise-Overlay-model.png|thumb|left|Traffic Noise Model]]

...lculated by the [[Shade_calculation_model_(Heat_Overlay)|shade calculation model]]; ...erlay)|hourly global radiation]] from the sun, supplied as weather station data;

...l [[Project]]'s data or a running [[Session]]. In addition to geographical data, the {{geoshare}} can also host other files which can be used as [[asset]]s ...n provides an additional secret which must be known in order to access the data.

...raw them, where you draw them. Applying the modifications to the elevation data is a separate, confirming step. {{howto|title=modify the elevation model in live sculpting mode

....|Optionally, change the delimiter and time units and click on ''Ok''. The data in the CSV is now used to set custom timeframes. }} ...oftware}} then automatically converts the time to the correct data for the model.

* The values in this prequel grid are clamped between 0 and 1000000. No data values are therefore not allowed, but could be clamped to zero when negativ * [[Ground model (Water Overlay)]]}}

...rid Overlay]] which serves as input for another (geographical) calculation model, overriding [[Key]]ed [[Attribute]] feature values. ...is then [[rasterization|rasterized]] to provide input for the calculation model. For a number of calculation models, it is possible to configure a Prequel

*Fixed various bugs, wrong user input and border cases for the Rain Model. *Added Courant number, which is a measure that indicates if a grid model is calculated with enough cycles (time steps). The Courant number can be fo

...can be linked to the [[Water Overlay]] to initiate particular parts of the model with more accuracy and detail. They can even be used to link result types o {{WaterOverlay simulation data nav}}

...y. Foe example, a weir is effectively a small dam in a waterway. In source data, these kinds of constructions may be location in an otherwise uninterrupted ...d or removed at will, leaving the elevation model as close to the original data as possible.

*[[Infiltration model (Water Overlay)]] {{WaterOverlay simulation data nav}}

* The [[elevation model]] is automatically set to a resolution of 10m. ..., NWB, BAG and BRP. See [[Project Sources]] for more information on theses data sets. Custom 3D models (such as 3D BAG and [[I3S]]) while not be available

...all tree-like Functions, and then [[Geo Data#Import Geo data|import]] that data into your Project again as update for your existing Constructions. * [[Evaporation model (Water Overlay)]]

...Foliage_height_calculation_model_(Heat_Overlay)|Foliage Height Calculation model]]. ...TIFF with cell specifying the height of foliage per cell, with optional no data when foliage is not present.

...as ground conductivity with or without thickness, is configured using the model attribute [[Hydraulic conductivity with thickness (Water Overlay)]]. {{WaterOverlay simulation data nav}}

## Supply daily weather station data ## Supply hourly weather station data

...preted. In addition, the {{Heat DPRA Report}} indicates that some types of data currently cannot be measured accurately enough in a location of water. To p {{HeatOverlay model attribute nav}}

...emission. It also takes into account [[Building|object]]s and [[Elevation model|terrain features]] which would hinder the travel of particles. [[File:Traffic_NO2-Overlay-model.png|thumb|left|Traffic NO2 Model]]

...ine which [[Project Source]]s the project should be based on. Geographical data will be requested from these [[Project Source]]s to build up and populate y ...ided name for the new [[Project]]. The copy is cleared of all geographical data. The running [[Session]] is then used to effect additional configurations.

...d impact of (heavy) rainfall over the project area. Based on the elevation model, terrain roughness and representations of the sewer and water systems, seve ...orms two dimensional grid based water simulations for a large set of input data and parameters, configured mostly through a related [[Water Overlay Wizard]

...ard]]. A few settings can only be changed manually. Besides the [[Geo Data|data]] of geographical features, which have their own means of loading in depend {{main|section=section|Ground water data model|Ground water}}

| overwritten=based on data in the [[Project Sources|NWB]]. * [[Traffic Model]]

| overwritten= based on data in the [[Project Sources|NWB]]. * [[Traffic Model]]

...recorded during the calculation. Each [[timeframe]] becomes a snapshot of data which can be viewed and analysed. {{WaterOverlay model attribute nav}}

The calculation model behind the overlay is based on the same algorithm as used in the [[Watershe * [[Model attributes (Travel Distance Overlay)|Model attributes]]

...t overlay always governs the calculation settings, such as the calculation model attributes and [[Overlay|keys]]. ...face. They can also be [[TQL|queried]] for their results, and [[Export Geo data|export]]ed.

...tal.png|thumb|Image of the [[Evaporation model (Water Overlay)|evaporation model]] in the [[Water Module]]]] * [[Evaporation model (Water Overlay)]]

...in the {{software}} is an implementation of a 2D grid based shallow water model based on the 2D Saint Venant equations. The module is further enhanced with ...ecific quantity of water and specific hydrological parameters based on the data in the project. The total time which should be simulated is divided into di

...uilding functions as an outlet, and water is removed from the hydrological model. ..._Q over time, by providing a file with times and flow rates. The resulting data is stored in INLET_Q as an [[attribute array]].

...f the water overlay, you must first set up a basic water model. This water model includes both your hydrological system, as well as the parameters used to p ...bjects can be loaded in from this datasource. If more complete or accurate data is available to be loaded in into the project after it is created, it may b

....|Optionally, change the delimiter and time units and click on ''Ok''. The data in the CSV files is now used to set the attribute for the structures dynami ...oftware}} then automatically converts the time to the correct data for the model.

...oftware}}. It is designed to minimalise the use of a GIS for preparing the data. ...hrough different processes for importing [[Geo_Data#Import_vector_data|Geo data]] in the {{software}}.<br>

|Prepare a [[CSV]] file with the desired timing data for the [[Infiltration factor s (Water Overlay)|infiltration factor s]]. |Select the CSV file with the desired timing data.

...prepared [[Function]] mapping when importing [[Geo Data]] using the [[Geo Data Wizard]]. ...Data Wizard]], which can be useful when dealing with project specific geo data files.

...ftware|client}}'s 3D Visualization with a textured height map, 3D building model and furniture, traffic and a skybox]] * [[Traffic Model|Traffic vehicles]], either driving or stationary.

The subsidence model calculates the gradual downward settling of the ground's surface where a pe The ground water level is initialized by either raster or surface area data and optionally adjusted each year (indexation). When indexation is active,

...flow and aquifers|horizontal flow]] in the ground layer. Additionally, the model also applies a simplified form of exfiltration of water from the soil back ==Multi Layered model==

* Fixed issue where water structures are incorrectly set when data changes. * Linked more existing OSM data to functions and terrains.

...ay]]. Across multiple steps, it progresses through each type of [[GEO Data|Data]] which can be configured, along with the most important [[attribute]]s of ...uration and contains a multitude of substeps to configure all geographical data. Its various components can be configured in the following order:

...c data is loaded in, the visualization will adjust accordingly. If traffic data is adjusted during a [[session]] or [[test run]], the visualization is adju Traffic is based on data in the [[Project]], but is spawned in onto the relevant [[Building]]s throu

* Import water depth data ...DEM resolution. Select a high DEM resolution to use the most accurate AHN data.

...calculation model (Heat Overlay)|Shade]] and [[Sky view factor calculation model (Heat Overlay)|Skyview]] calculation models. It depends on the available data and the use case which option you will choose as a user. When developing fu

=== Step 1: Select model === ...ep 1 you can choose either the new (more accurate) [[Heat_DPRA_Module|DPRA Model]] or the [[UNESCO Heat Module|UNESCO Heat stress module]] that was used in

The Sight Distance Overlay's calculation model has a number of aspects which can be configured: ...defines which [[Attribute]] the Sight Distance Overlay should look for in data in the [[Project]]. When found, the [[Item]] on which it is found is consid

...should, for the most part, be able to flow naturally. However, as with any model, at some point the [[Water Overlay]] has an edge, leading to partially unex ...make sure that any added area is also covered by data sets similar to the data sets you have already used for your relevant area. Otherwise you may encoun

* Cadastral data is fixed for latest PDOK format (version 3). * Several bug fixes in Rainfall model.

...for visualization of the traffic density calculations (See also: [[Traffic Model]]) of the various types of roads. For example, a highway has more units per *[[Unit Data]]

=== Step 1: Select model === ...ep 1 you can choose either the new (more accurate) [[Heat_DPRA_Module|DPRA Model]] or the [[UNESCO Heat Module|UNESCO Heat stress module]] that was used in

...|Heat Stress Module]] of the [[Heat_(Overlay)|Heat Overlay]]. This weather data is used either directly (humidity) or as a means to translate to a value on ...weather data for relevant days and UTC hours using historical KNMI weather data measured at [[Weather_station_(Heat Overlay)|weather stations]].

...s project if you are working in fields such as hydrology, water safety and data analysis and visualization. ...u are working in fields such as climate adaptation, environmental studies, data analysis and visualization and urban planning.

The travel distance model can several features to calculate travel distances. Some determine the road ...of use when setting up a project or [[template]] which makes use of [[Geo Data Wizard|user-provided geodata]].

...ain and simulation time are defined in [[Weather (Water Overlay)|Weather]] data. * [[Rain model (Water Overlay)]]

...is tutorial you will learn the different ways to import different types of data in your project: * data from Web services

Water polygons supplied by Geo data often do not include the shorelines around it, which could still contain wa {{WaterOverlay model attribute nav}}

...lay. The Waterwijzer Module sends the data to Waterwijzer API and receives data on yield losses. # The Waterwijzer module then stores the grid data under following result type overlays, categorized as:

{{howto|title=add your own GeoTIFF with groundwater data to the Water Overlay * [[Ground model (Water Overlay)]]

...e is either too large to fit in the project area, or is not present in the data of the project for other reasons. |Configure the Overlay with a [[Basic water model use case (Water Overlay)|basic hydrological system]].

...This allows Panels to display information specific to a Panel or specific data in the [[Project]], such as [[Attribute]]s and [[Stakeholder]]s. ===Calculation model===

* Wizard speedup when loading Geo data by better balancing the requests to the Source Servers. * Fixed several 3D Model visualizations.

...dies using [[Discharge_area_(Watershed_Overlay)|discharge areas]] as input data. Additionally, culverts that connect waterways and bodies can be taken into In a water system model, the waterways generally catch the rainfall and transport it elsewhere, oft

===Calculation model steps=== To calculate subsidence, the parameters are initialized based on data available in the [[Project]].

==Tree and foliage data in general== ...ence of green is significant. It is therefor important to have as accurate data as possible related to the presence of green in an urban environment for a

A Template Panel is linked to a specific type of data, indicating for that data [[Panel]]s should be created. When a Template Panel is "applied", Instanced When a Template Panel is linked to a specific type of data, filters can be added as well. This means Instanced Panels will only be cre

...cation for the building around the original location. However, in case the model cannot find an alternative location for the building, it will be non-functi ...d to make the corrections using an external GIS tool before loading in the data.

...o are working in fields such as climate adaptation, environmental studies, data analysis and visualization and urban planning ...osen because this area is used for the Dutch benchmark for the Heat Stress model described in the {{Heat DPRA Report}}. This demo project is based on that b

...flows will occur in different parts of the flow field, see Figure (b). The model is run until time T = 30 hours to allow the flood to settle in the lower pa * ''Model grid resolution: 50m (or ~7600 nodes in the 19.02 km 2 area modelled)''

...a project use an underlying calculation model, which rasterize the spatial data and apply calculations to it to produce various (intermediate) results. The ...type=Feature | display=Presence of a specific attribute in a data layer}}

...alue of using the Tygron platform for courses that focus on processing geo-data. [[File:Rivierenwijk.png|200px|frame|center|Tygron Model of the Rivierenwijk, Utrecht]]

====Calculation Model==== ...ngs are related to a specific [[Net Type]]. This allows for the underlying data and relevance for each network type to differ.

...ealistic evaporation rates for the Netherlands using historic KNMI weather data. These evaporation rates can be used for the configuration of [[Evaporation |Select the KNMI data tab, ''(Most likely named result)'', and reference cell B9.

...s a [[popup]]. Instead, there are options to apply the template on spatial data, such as neighborhoods or areas. This will create an instance of this panel ...e the same as the properties of the Template Excel panel. For example: the model, whether it requests attention or not, to which stakeholder it is assigned,

:* How to build a 3D dynamic model? :* How to add and export data?

...Overlay Wizard]]. This demo project demonstrates how the imported GeoTIFF data is used and displayed in two specific overlays. ...for seepage in a [[Water Overlay]]. Both are based on the same calculation model, just with different seepage parameters configured. For either Overlay, it'

...[[Water_Overlay_Wizard|configuration wizard]] and have learnt what kind of data is used as input for the [[Water_Module_Theory|water module]]. Some [[Import_Geo_data#Requirements|tips for using vector data files]] for the [[Water_Overlay]]:

...is a calculated [[overlay]]. It uses a 2-dimensional grid for calculation, data storage and visualization. The calculation divides the entire [[project]] i ...ated. This can be as simple as displaying (possibly inherently) rasterized data, such as [[GeoTIFF Overlay]]s or the [[Heightmap Overlay|heightmap]], or as

...r flow to the configured accuracy. The only way to enhance the [[elevation model|heightmap]] accuracy is to load in a new [[Project]] with a more detailed [ ...gh to contain any water. This is not strictly impossible, but may indicate data error.

To do that, the lecturer and the teaching assistant have created a model case study based on the Champs-Elysées area in Paris using the Tygron plat They called the model the "Paris Game". It is inspired by an existing redevelopment plan of the P

...sport water to, from, and between specified cells, according to their flow model and given parameters. The behavior of these Buildings can be adjusted by ad ...of use when setting up a project or [[template]] which makes use of [[Geo Data Wizard|user-provided geodata]].

...e section {{inlink|Variations}} for other examples and inspirations how to model your distance calculations for your own use cases. The second use case is a ...uous trees within 20 meters of the water edge. It is currently possible to model this calculation. It requires the following:

===Configure panel model, visibility, and attention=== Change the “Model” property of the panel to change which 3D model is used to display the popup. Options include a green check, a red X, a dem

...jpg|350px|frame|center|The traffic noise overlay is a standard calculation model.]] ...manipulate those calculated values. One often used principle is to "mask" data, which basically means to explicitly obscure or let through some values.

* Dutch CBS data is loaded into the Neighborhood, providing information about the population * Added option to directly start the new [[Geo Data Wizard]] via the Geo Data menu in the editor.

...you try loading the location into the {{software}} and testing it? Is the data available in my selected location? ===2. Tygron with GIS data: ''“[[Tygron_for_GIS_Data|Planting Trees to Reduce Heat Stress]]”'' ===

...n as the location for the digital twin, was because of the availability of data of neighborhood composition. The neighborhood Leusderkwartier and some othe ...and a minimum floor height of 2m. This floor height was obtained from the model, by making an [[Average_Overlay|Average Overlay]] based on the [[Floor heig

...However, faster connections are better, especially when working with large data sets. We also strongly advise to test the performance and connectivity of t ...50x-3080-ti-2tb-ssd-nvme-fluister-stil-vid-r9-a2 Davinci Computer]<br>This model is currently in active use at Tygron.

...enerated automatically based on the available data from the connected open data sources. This is the so called baseline project. The baseline project repre ...ht contour of a building. Sometimes there is not enough information in the data to determine the purpose of the building so a placeholder is used. Or, in r

<gallery caption="Tygron Model showing the current situation in Hoefkade (scenario 0)" mode="packed-overla File:basemaphoefkade0.png|Tygron model showing the neighbourhood

...application specializing in rapid, parallel calculations and processing of data. Organizations have a license which allows access to the software, and a [[ ...ed as a [[Session]], which is an interactive representation of [[Project]] data. Generally, only one [[Session]] can exist per [[Project]].

...ollowing forms often provide a firm basis for using TQL to obtain required data. ...ensity is a function value which affects calculations related to [[Traffic Model|traffic]]. Some use-cases require these values to be updated dynamically. T

| The geometry that is used to limit the data obtained during [[New_Project_Wizard|''New Project generation'']]. | The [[Building style|model style]] of the [[building]]'s in the [[3D Visualization]].

==Benodigde data== ...et gebruiken van het {{software}}, de [[Water Overlay Wizard]] en de [[Geo data wizard]] is vereist.

* Inspect data in a session in greater detail ...The session API is for interactions with a specific session, modifying the data in it, or obtaining results as calculated in the Session.

...he requested information, and a number of clauses, which define/filter the data taken into consideration. Ensure the query type is set to "SELECT", which means to request data from the Project.

This indicator is a simplified version of a RIVM calculation model and was created for a pilot with the RIVM.  The indicators in this pilot .... (RIVM), De Nijs, T. (RIVM), & Paulin, M. (RIVM), (2018). Natural Capital Model Technical documentation of the quantification, mapping and monetary valuati

...formulas used for the above-ground water flow, and whether the groundwater model is active. ...plete, a larger amount of timeframes does mean the results consist of more data, and as such may take longer to download.

*To create the game, the researcher used the following data sources: *#Delft3D Flexible Mesh hydrodynamic model

...ct has been configured to only perform calculations in the areas for which data exists.{{clear}}

...If any calculation takes place, especially spatial calculations, all that data can serve as input. That makes it a lot more difficult to see exactly how a For this reason, what characterizes a testbed most is the absence of data. Anything that is not required for a specific case is left out, or at least

...ck on generate map to generate the [[project]] from [[Project_Sources|open data]]. ...urrent Situation tab]], in where you can edit the current situation of the model.

...of an (xlsx) Excel spreadsheet can be created by the user to process this data. A change in the project state provides input to the indicator, the indicat ...UNITS_WHERE_CATEGORY_IS_SOCIAL_AND_MAP_IS_CURRENT</code>) in order to load data from the project. Cell values can consist of actual values or text strings,

...t hoofdsysteem met afmetingen, kunstwerken en afvoeren. Dit leidt tot meer data die beschikbaar moet zijn en ingeladen moet worden en tot grote modelgebied ...heb je meer inzicht in het effect van de gridgrootte op de input voor het model.

...waterwijzer' />. Because the {{software}} connects to the same calculation model, the same input should also lead to the same output. ...size. By creating an empty [[project]] we have full control of the spatial data that is present.

...ed. In the manual a more explicit description is given and the calculation model is explained. ...blue area is meant for calculations - for instance, adding and subtracting data from the Platform. The area on the far right is the HTML table meant for pr

Networks are a separate data layer in a [[project]], intended to model actual resource transport networks, such as for gas, heat, and internet. Th

Based on our previous research on the issue of TDR in the Lower East Side, we model LES + NYCHA campuses, taking into account the various zoning restrictions. ...erability was also impeded, since we had to manually input the real estate data from our previous proforma work.