Weir target level (Water Overlay)

Icon	Key	Unit	Range	Description	Default value
	WEIR_TARGET_LEVEL	m + datum	-10000 to 10000	The Weir can be configured to adjust it's height automatically in order to reach the target upstream water level. This parameter is optional.	n/a

Notes

• The interval before re-evaluating the Weir height is configured using the Water Overlay's model attribute WEIR_MOVE_INTERVAL_S.
• This value is set as a single value, not an array.
• The weir can move with a distance defined in the overlay with the model attribute WEIR_MOVE_STEP_M.
• The weir's movement range can be set using the overlay's model attribute WEIR_MOVE_RANGE_M. This can be interpreted as the maximum allowed difference in the configured WEIR_HEIGHT and the adjusted weir height.
• A value of -10000 means the weir target value is non-functional. In such case, the weir height at time t is used.

See also

• Weir formula (Water Overlay).
• Weir height test case (Water Module)
• How to import a time sequence with a CSV

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Group

Hydraulic structures

Inlet

Inlet q • Inlet area • Inlet capacity •  Lower threshold •  Upper threshold • Inlet underground

Pump

Pump q •  Lower threshold •  Upper threshold • Pump angle • Pump capacity • Pump area

Culvert

Culvert diameter • Culvert rectangular height • Culvert threshold • Culvert n

Weir

Weir height • Weir width • Weir angle • Weir coefficient • Weir target level

Sewer overflow

Sewer overflow • Sewer overflow speed

Drainage

Drainage q • Drainage datum • Drainage active • Drainage overflow threshold

Output

Object flow output • Object height output • Object datum output a • Object datum output b • Object width output

Related

Building attributes • Hydrological features •  Terrain attributes • Model attributes • Results • Simulation data