Inlet (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Inlets are points where water is either added to or removed from the hydrological model. It will add or remove water at a defined maximum rate, with optional thresholds for the amount of water to add or remove.
{{Inlets}} are hydraulic structures that can pump water in to the hydrological model, or out of, in which case they function as '''Outlets'''. It will add or remove water at a defined maximum rate, with optional thresholds for the amount of water to add or remove.


[[File:waterwizard_icon_inlet.png|75px]] An inlet is a [[Point-based_construction_(Water_Overlay)|point-based construction]].
[[File:waterwizard_icon_inlet.png|75px]] An {{Inlet}} is by default a [[Point-based_building_(Water_Overlay)|point-based building]], but can optionally be an [[Area-based_building_(Water_Overlay)|area-based building]].


{{Overlay keys|suppresscategory=true|
{{Overlay keys|suppresscategory=true|
{{:inlet q (Water Overlay)}}
{{:inlet area (Water Overlay)}}
{{:inlet area (Water Overlay)}}
{{:inlet q (Water Overlay)}}
{{:inlet capacity (Water Overlay)}}
{{:inlet capacity (Water Overlay)}}
{{:inlet lower threshold (Water Overlay)}}
{{:inlet lower threshold (Water Overlay)}}
{{:inlet upper threshold (Water Overlay)}}
{{:inlet upper threshold (Water Overlay)}}
{{:inlet underground (Water Overlay)}}
}}
}}


{{article end
{{article end
|notes=
|notes=
* Each Inlet attribute functions as a limit to the flow. If multiple are defined, the flow is limited by the strongest limit. If neither an [[Inlet_q_(Water_Overlay)|INLET_Q]] or any threshold is defined, there will be no flow.
* Most {{Inlet}} attributes function as a limit to the flow. If multiple are defined, the flow is limited by the strongest limit. If neither an [[Inlet_q_(Water_Overlay)|INLET_Q]] or any threshold is defined, there will be no flow.
* A negative [[Inlet q (Water Overlay)|INLET_Q]] changes the Inlet to an Outlet.
* A negative [[Inlet q (Water Overlay)|INLET_Q]] changes the {{Inlet}} to an {{Outlet}}.
* The [[Pump lower threshold (Water Overlay)|lower]] and [[Pump upper threshold (Water Overlay)|upper threshold]]s can be seen as a the lowest and highest of "range" of valid water levels. If the actual water level does not fall in the specified range, the inlet will allow water to flow in or out (depending on the configuration) to correct the water level.
* The [[Pump lower threshold (Water Overlay)|lower]] and [[Pump upper threshold (Water Overlay)|upper threshold]]s can be seen as a the lowest and highest of "range" of valid water levels. If the actual water level does not fall in the specified range, the {{Inlet}} will allow water to flow in or out (depending on the configuration) to correct the water level.
* A [[Pump (Water Overlay)|Pump]] is different from an [[Inlet (Water Overlay)|{{inlet}}]] in that a pump has two endpoints (or areas) within the project areas, whereas an {{inlet}} has an end point (or area) within the project area and an endpoint (or area) outside the project area; a conceptual external area with a size and a water level.
|howtos=
|howtos=
* [[How to correct inlets on land]]
* [[How to correct inlets on land]]
* [[How to correct multiple constructions on the same location]]
* [[How to correct multiple buildings on the same location]]
|seealso=
|seealso=
* [[Inlet formula (Water Overlay)]]
* [[Inlet formula (Water Overlay)]]
}}
}}


{{WaterOverlay hydraulic structure nav}}
{{WaterOverlay hydraulic structure nav}}

Latest revision as of 09:41, 29 January 2024

Inlets are hydraulic structures that can pump water in to the hydrological model, or out of, in which case they function as Outlets. It will add or remove water at a defined maximum rate, with optional thresholds for the amount of water to add or remove.

Waterwizard icon inlet.png An Inlet is by default a point-based building, but can optionally be an area-based building.

Notes

  • Most Inlet attributes function as a limit to the flow. If multiple are defined, the flow is limited by the strongest limit. If neither an INLET_Q or any threshold is defined, there will be no flow.
  • A negative INLET_Q changes the Inlet to an Outlet.
  • The lower and upper thresholds can be seen as a the lowest and highest of "range" of valid water levels. If the actual water level does not fall in the specified range, the Inlet will allow water to flow in or out (depending on the configuration) to correct the water level.
  • A Pump is different from an Inlet in that a pump has two endpoints (or areas) within the project areas, whereas an Inlet has an end point (or area) within the project area and an endpoint (or area) outside the project area; a conceptual external area with a size and a water level.

How-to's

See also