Ground bottom flow formula (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 17: Line 17:
: <math>h_{x,y}</math> = [[Groundwater level formula (Water Overlay)|Ground water head]] in the grid cell.
: <math>h_{x,y}</math> = [[Groundwater level formula (Water Overlay)|Ground water head]] in the grid cell.
: <math>h_{d}(t)</math> = Additional [[Ground bottom pressure m (Water Overlay)|global pressure]] at time t, in meters
: <math>h_{d}(t)</math> = Additional [[Ground bottom pressure m (Water Overlay)|global pressure]] at time t, in meters
: <math>p_{x,y,tf}</math> = [[Bottom pressure prequel (Water Overlay)#Bottom pressure|Ground water level (or head) of the external zone]] in meters at [[Timeframes (Water Overlay)|timeframe]] <math>tf</math>.
: <math>p_{x,y,tf}</math> = [[Bottom pressure prequel (Water Overlay)#Bottom pressure|Ground water level (or head pressure)]] in meters at [[Timeframes (Water Overlay)|timeframe]] <math>tf</math>.
: <math>h_{v}(t)</math> = [[Ground bottom pressure m (Water Overlay)|Additional variation of bottom head pressure]] over time
: <math>h_{v}(t)</math> = [[Ground bottom pressure m (Water Overlay)|Additional variation of bottom head pressure]] over time
: <math>c_{x,y,tf}</math> = [[Bottom resistance prequel (Water Overlay)#Bottom resistance|Resistance of the separating layer]] in days at [[Timeframes (Water Overlay)|timeframe]] <math>tf</math>
: <math>c_{x,y,tf}</math> = [[Bottom resistance prequel (Water Overlay)#Bottom resistance|Resistance of the separating layer]] in days at [[Timeframes (Water Overlay)|timeframe]] <math>tf</math>

Revision as of 16:27, 26 January 2024

Hoe is kwel geïmplementeerd in het Tygron Geodesign Platform? (Dutch only)

Ground water flowing in from deeper ground layers through the bottom boundary, due to head pressure from water bodies situated outside the project area is calculated per grid cell. The formula is based on the principles used in the formula of Pankow for estimating this ground bottom flow[1].

The water level change due to ground bottom flow is calculated using the following formula:

The external bottom head pressure is variable over time by the introduction of :

Finally, the actual amount of water flowing into the ground from the deeper ground layers through the bottom boundary is calculated as followed:

where:

= The water level change due to the ground bottom flow, in meters.
= Computational timestep in seconds.
= Ground water head in the grid cell.
= Additional global pressure at time t, in meters
= Ground water level (or head pressure) in meters at timeframe .
= Additional variation of bottom head pressure over time
= Resistance of the separating layer in days at timeframe
= Water storage fraction of the soil
= Seeped in water in m

Notes

  • The calculated is essentially the change in groundwater level, inherently taking into account the porosity of the soil. The final is representative of the actual amount of water, i.e. the height of the water, if the relevant quantity of water wasn't in the ground but sat on the surface instead.
  • and can both be provided as spatially variable values using prequel overlays. These prequels can have multiple timeframes, as indicated by the formula, allowing changing head and resistances over time.
  • can be provided as a set of values, variable over time.
  • A seepage head lower than the water level in the project is also allowed, resulting in water seeping out to a region outside the project area.

How-to's

Related

The following topics are related to this formula.

Formulas
Groundwater level formula (Water Overlay)
Models
Ground model (Water Overlay)

See also

References