Ground bottom flow result type (Water Overlay)

From Tygron Support wiki
Jump to navigation Jump to search
Icon Result type Unit Mode Description
Overlay icon water ground bottom flow.png GROUND_BOTTOM_FLOW m Last The amount of water that has flown into the ground from deeper ground layers through the bottom boundary, raising the groundwater table.

¹ the units between () are as displayed in the 3D client. If exported to GeoTiff the SI-convention is used: meters (m) and seconds (s).

Notes

  • This overlay displays only ground bottom flow as related to the configured Bottom resistance and pressure prequels , not to the various processes of infiltration and exfiltration between the ground layers and surface.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Surface
Building last storage • Evaporated • Flood arrival time • Flood rise rate • Last evaporated • Last rain • Rain • Surface avg direction • Surface duration • Surface elevation • Surface flow • Surface last datum • Surface last direction • Surface last flow • Surface last speed • Surface last value • Surface last u • Surface last v • Surface max speed • Surface max value • Water stress
Underground
Ground bottom flow • Ground flow • Ground last direction • Ground last storage • Ground last value • Ground max storage • Ground max value • Ground watertable • Ground last unsaturated storage • Ground last unsaturated fraction
Sewer
Sewer last value • Sewer max value
Substances
Tracer a • Tracer b • Tracer c • Tracer d
Other
Base types • Debug uv • Debug uv direction • Debug avg areas • Debug waterways • Gpu overview • Impacted buildings • Surface difference
Related
Results
Retrieved from "https://support.tygron.com/w/index.php?title=Ground_bottom_flow_result_type_(Water_Overlay)&oldid=60421"