Storage model (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
mNo edit summary
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
Water on the [[Surface model (Water Overlay)|surface]] can flow into a construction's [[Water storage (Water Overlay)|water storage]]. This mechanism allows for short term water storage to reduce peak flow caused by, for example, heavy rainfall.
Water on the [[Surface model (Water Overlay)|surface]] can flow into a building's [[Water storage (Water Overlay)|water storage]]. This mechanism allows for short term water storage to reduce peak flow caused by heavy rainfall.


Water storage in constructions can be implicitly activated or deactivated by adjusting their [[Water storage (Water Overlay)|WATER_STORAGE]] attribute. If there are no constructions in the project area with water storage capacity, no water storage will take place.
Water storage in buildings can be implicitly activated or deactivated by adjusting their [[Water storage m2 (Water Overlay)|WATER_STORAGE_M2]] attribute. If there are no buildings in the project area with water storage capacity, no water storage will take place.


When water flows onto a cell with a [[Water storage (Water Overlay)|construction capable of storing water]], that water will be stored in the construction until the construction's water storage capacity has been reached. Water cannot leave that storage, neither through flowing back into the surface water model nor by being removed from it altogether. When the storage is full, no additional water cannot flow into that storage for the remainder of the simulation.
When water flows onto a cell with a [[Water storage (Water Overlay)|building capable of storing water]], that water will be stored in the building until the building's water storage capacity has been reached. Water cannot leave that storage, neither through flowing back into the surface water model nor by being removed from it altogether. When the storage is full, no additional water cannot flow into that storage for the remainder of the simulation.


==Related formulas==
==Related formulas==
Line 11: Line 11:
==Related models==
==Related models==
* [[Surface model (Water Overlay)|Surface model]]
* [[Surface model (Water Overlay)|Surface model]]
 
{{article end
{{Template:WaterOverlay_nav}}
|seealso=
{{Water Module buttons}}
* [[Building_last_storage_result_type_(Water_Overlay)|Building last storage result type]]
}}
{{WaterOverlay formula nav}}

Latest revision as of 09:00, 29 January 2024

Water on the surface can flow into a building's water storage. This mechanism allows for short term water storage to reduce peak flow caused by heavy rainfall.

Water storage in buildings can be implicitly activated or deactivated by adjusting their WATER_STORAGE_M2 attribute. If there are no buildings in the project area with water storage capacity, no water storage will take place.

When water flows onto a cell with a building capable of storing water, that water will be stored in the building until the building's water storage capacity has been reached. Water cannot leave that storage, neither through flowing back into the surface water model nor by being removed from it altogether. When the storage is full, no additional water cannot flow into that storage for the remainder of the simulation.

Related formulas

Related models