Breach height (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{Overlay attribute
{{Overlay keys|<onlyinclude>
|key=[[Breach_height_(Water_Overlay)|BREACH_HEIGHT]]
{{Overlay keys|type=row|group=Water Overlay
|key=BREACH_HEIGHT
|unit={{mdatum}}
|unit={{mdatum}}
|description=The new [[terrain height (Water Overlay)|terrain height]] at the location of the breach.  
|description=The new [[terrain height (Water Overlay)|terrain height]] at the location of the breach.  
|defaultvalue=n/a
|defaultvalue=n/a
|icon=[[File:waterwizard_icon_breach_height.png]]
|icon=waterwizard_icon_breach_height.png
}}
}}</onlyinclude>}}
 
==Array==
==Array==
This attribute can be defined as [[time sequence (Water Overlay)|values over time]], using an array of values defining {{time sequence interpolated}}. This allows users to more dynamically define the height used in the [[Breach_flow_formula_(Water_Overlay)|Breach flow formula]].
This attribute can be defined as [[time sequence (Water Overlay)|values over time]], using an array of values defining {{time sequence interpolated}}. This allows users to more dynamically define the height used in the [[Breach_flow_formula_(Water_Overlay)|Breach flow formula]].
Line 19: Line 21:
* h = -4,15 m after 2700 seconds.
* h = -4,15 m after 2700 seconds.


==Notes==
{{article end
* The initial surface height at the breach (both active and inactive) cells are lowered to the lowest value of the defined breach height array.
|notes=
* The initial surface height at the breach (both active and inactive) cells are lowered to the lowest value of the defined breach height array. This means that the elevation model immediately has a "hole" where the breach can potentially be. The breach height values of the array are only used for the computation of water flowing ''through'' the breach, not over its Area.
* The breach height as an array can also be used to stop a breach from flowing in water after x amount of seconds. However, as mentioned in the note above, it cannot be used to raise the actual surface height in the simulated area.
* The breach height as an array can also be used to stop a breach from flowing in water after x amount of seconds. However, as mentioned in the note above, it cannot be used to raise the actual surface height in the simulated area.
 
* When using a dynamic BREACH_HEIGHT, a maximum of {{array max|pairs}} can be defined.
==How to==
|howtos=
*[[How to set dynamic breach height|How to set dynamic breach height]]
*[[How to set dynamic breach height]]
 
|seealso=
==See also==
* [[Elevation model (Water Overlay)]]
* [[Elevation model (Water Overlay)|Elevation model]]
* [[Breach growth formula (Water Overlay)]]
* [[Breach growth formula (Water Overlay)|Breach growth formula]]
}}


{{WaterOverlay hydrological features nav}}
{{WaterOverlay hydrological features nav}}

Latest revision as of 08:38, 23 June 2022

Array

This attribute can be defined as values over time, using an array of values defining interpolation-time. This allows users to more dynamically define the height used in the Breach flow formula.

Example

A levee with a datum height of 4 m is breached after 1800 seconds. It lowers down to -4.15 m in 900 seconds.

This can be simulated with the following array: 0 4 1800 4 2700 -4.15

The height value (h) used is:

  • h = 4 between 0 and 1800 seconds;
  • h = linearly interpolated between 4 and -4.15 based on time t within 1800 and 2700 seconds;
  • h = -4,15 m after 2700 seconds.

Notes

  • The initial surface height at the breach (both active and inactive) cells are lowered to the lowest value of the defined breach height array. This means that the elevation model immediately has a "hole" where the breach can potentially be. The breach height values of the array are only used for the computation of water flowing through the breach, not over its Area.
  • The breach height as an array can also be used to stop a breach from flowing in water after x amount of seconds. However, as mentioned in the note above, it cannot be used to raise the actual surface height in the simulated area.
  • When using a dynamic BREACH_HEIGHT, a maximum of 10.000 values (5.000 pairs) can be defined.

How-to's

See also