Aquifer datum (Water Overlay)

From Tygron Support wiki
Jump to navigation Jump to search
Icon Key Unit Range Description Default value
Waterwizard icon aquifer height.png AQUIFER_DATUM m + datum The datum height at which the aquifer layer is situated. n/a

Notes

  • If the AQUIFER_KD is set, the Aquifer will appear in the configuration wizard, with the AQUIFER_DATUM set to 0. However, if the value is not set explicitly, the aquifer will not function.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Water area
Water level • Water relative
Sewer area
Sewer storage • Sewer pump speed
Inundation area
Inundation level
Aquifer
Aquifer kd • Aquifer datum
Breach
Breach height • Breach width • Breach angle • Breach coefficient • Breach speed • Breach input area • Breach level area • External surface level • External water level • External area
Rain area
Rain m
Limitation area
Limit area
Output
Object flow output • Object height output • Object datum output a • Object datum output b • Object width output
Related
Building attributes • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Aquifer_datum_(Water_Overlay)&oldid=57884"