Terrain root depth m (Water Overlay)

Icon	Attribute	Unit	Layer	Range	Description
	ROOT_DEPTH_M	m	Surface		The depth of the roots of the terrain type. This depth is used to determine whether evaporation will occur from the groundwater.

Terrains can be configured with plant-related attributes, similar to constructions configured as crops and foliage, allowing it to draw water from the underground and evaporate it.

Feddes Trapezium

Plants can experience oxygen stress when the groundwater level is too high. The plant roots become saturated so that the plant can no longer transpire. To simulate the oxygen stress, the ROOT_DEPTH_M can also be configured with four values instead of one, which will be interpreted using Feddes transpiration model. In the model, when the groundwater level rises, the transpiration increases. However, at a certain point, the groundwater is too high and the transpiration decreases. Water on the surface can then still evaporate, but the plant cannot transpire anymore.
The sequence for the four values should be defined in order of largest to smallest depth values and are interpreted as a 0-1-1-0 transpiration factor trapezium.

Evaporation in the Tygron Platform (Dutch only)

Notes

• For plants to evaporate water, both the ROOT_DEPTH_M and the WATER_EVAPORATION_FACTOR must be appropriately configured.
• Trees typically have deeper root than crops.
• When a construction is present in any given location, the values for evaporation in the underground will overrule any values set by terrain in the same location. To model underground evaporation without a construction, set the attributes of the construction on the applicable terrain type instead.
• When there is no construction present on the surface, and the terrain has a ROOT_DEPTH_M of 0, the amount of evaporation which takes place in that location is 0.

How-to's

• How to add and remove an Attribute

See also

• Root depth m (Water Overlay)
• Groundwater level formula (Water Overlay)
• Underground evaporation formula (Water Overlay)
• Underground model (Water Overlay)
• Evaporation model (Water Overlay)

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Group

Terrain attributes

Terrain attributes

Ground infiltration md •  Hydraulic conductivity md •  Hydraulic conductivity with thickness md •  Root depth m •  Water •  Water evaporation factor •  Water manning •  Water microrlief m •  Water storage percentage

Related

Building attributes • Hydrological features • Hydraulic structures • Model attributes • Results • Simulation data