Aquifer (Water Overlay)

From Tygron Support wiki
Revision as of 14:09, 1 November 2019 by Frank@tygron.nl (talk | contribs)
Jump to navigation Jump to search

The aquifer is an additional definition for the underground, allowing for underground horizontal flow different from the underground terrain's GROUND_INFILTRATION_MD. Template:Overlay attribute

Notes

The aquifer only functions if its hydraulic conductivity is greater than 0. If it is 0 or less the aquifer is disregarded, and the GROUND_INFILTRATION_MD of the underground terrain is used.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Water area
Water level • Water relative
Sewer area
Sewer storage • Sewer pump speed
Inundation area
Inundation level
Aquifer
Aquifer kd • Aquifer datum
Breach
Breach height • Breach width • Breach angle • Breach coefficient • Breach speed • Breach input area • Breach level area • External surface level • External water level • External area
Rain area
Rain m
Limitation area
Limit area
Output
Object flow output • Object height output • Object datum output a • Object datum output b • Object width output
Related
Building attributes • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Aquifer_(Water_Overlay)&oldid=29300"