Max water bottom m (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 5: Line 5:
|description=The maximum height for the bottoms of [[terrain water (Water Overlay)|water terrain]]s. Any [[terrain water (Water Overlay)|water terrain]] with a bottom at a higher {{datum}} height has its bottom lowered to this value.
|description=The maximum height for the bottoms of [[terrain water (Water Overlay)|water terrain]]s. Any [[terrain water (Water Overlay)|water terrain]] with a bottom at a higher {{datum}} height has its bottom lowered to this value.
|icon=Max_water_bottom_m.png
|icon=Max_water_bottom_m.png
|defaultvalue=10000
}}</onlyinclude>}}
}}</onlyinclude>}}



Latest revision as of 08:22, 10 February 2022

This functionality can be used to resolve some instances where an irregular bottom of waterways would inhibit the proper flow of water. Because in slow-moving models there is little difference to to deep or shallow water if the amount of water flowing to adjacent cells is minimal, setting this attribute to a sufficiently low value can allow water to flow uninhibited by artifacts in the height of the waterway's bottom.