Impact flood threshold m (Water Overlay)

From Tygron Support wiki
Revision as of 15:57, 29 January 2024 by (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The impact flood threshold m setting can be configured in the Output Overlays step of a Water Overlay wizard when the impacted buildings result is selected as an output overlay.

Water must reach this height either on one of the cells the Building is on, or on one of the cells adjacent to it. With the impact range m attribute the width of the water along the facade can be adjusted. This is used to compute the Impacted buildings result type.

Impacted buildings.jpg