Bridge elevation (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 5: Line 5:
|description=Specifies the mode by which bridges are include in the elevation model, used for the water calculations.
|description=Specifies the mode by which bridges are include in the elevation model, used for the water calculations.
|defaultvalue=Lowest
|defaultvalue=Lowest
|icon=waterwizard_icon_bridges.png
}}</onlyinclude>}}
}}</onlyinclude>}}


Revision as of 08:31, 17 October 2022

Icon Attribute Unit Range Description Default value
Waterwizard icon bridges.png BRIDGE_ELEVATION nominal Specifies the mode by which bridges are include in the elevation model, used for the water calculations. Lowest

0. Lowest: Lowest elevation point from Terrain below bridge is used.
1. Terrain: Use standard elevation from Terrain. Bridges are excluded from the DEM, allowed water to flow as if they didn't exist.
2. Bridge : Use bridge deck as elevation. Bridges and floating Constructions are included in the DEM, blocking water flow.

Notes

  • When using Bridge mode, it is still possible to model the flow from one side of a bridge to the other by using a Culvert.

How-to's

Videos

Explanation of how bridges are made water permeable in the Tygron Platform. (In dutch)
Explanation how to deal with bridges and the elevation map in your water system. (In dutch)
Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Bridge_elevation_(Water_Overlay)&oldid=48010"