Impact range m (Water Overlay)
Revision as of 15:53, 11 December 2020 by Godelief@tygron.com (talk | contribs)
Please note: This page is currently being updated.
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
 |
IMPACT_RANGE_M | m | the width in meters of the water next to or against the building that has to be flooded before the building is considered impacted by water. | n/a |
This attribute can tune the amount of cells that has to be flooded before the buildings is considered impacted. For example a value of 0 means the buildings is always impacted, a value of 1 means at least 1m of cells touching the building needs to be flooded and so on. With the Impact flood threshold m attribute the height of the water before the buildings is considered impacted can be adjusted.
How-to's
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related