Ground water (Water Overlay)
Revision as of 13:05, 29 January 2024 by Frank@tygron.nl (talk | contribs)
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
| GROUND_WATER | nominal value | Whether and how water in the ground is simulated during the calculation. | Infiltration Only |
| 0. | None: No infiltration, no groundwater flow, no ground evaporation. |
| 1. | Complete: Full groundwater simulation, including infiltration, flow, and evaporation |
| 2. | Infiltration only: Water can Infiltrate into the unsaturated zone only, but no further ground flow or ground evaporation is simulated. The unsaturated zone is simulated to have infinite capacity. |
Notes
- Groundwater Overlays have the ground model active by default. The other Water Overlay variants have the ground model set to infiltration only. This is a recommended setting, trading in an imperceptible amount of accuracy for a more performant calculation setup.
- This setting does not affect water flowing in- and out of the sewer.
How-to's
See also
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related