Weir move step m (Water Overlay)
Revision as of 15:11, 26 February 2024 by Frank@tygron.nl (talk | contribs)
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
 |
WEIR_MOVE_STEP_M | seconds | When the move interval has passed the Weir height is adjusted up/down by this step distance in meters. | 0.01 |
Notes
- The weir height cannot be adjusted further than the move range relative to the initial weir height that is defined at that time. (When it is defined as a time value array)
- Only one general interval time can be configured, which is applied to all weirs that have a target level.
See also
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related