Impact flood threshold m (Water Overlay)
Revision as of 15:35, 29 January 2024 by Frank@tygron.nl (talk | contribs)
![](/w/images/7/76/Wateroverlay_wizard_ground_watertable_with_surface.png)
The impact flood threshold m setting can be configured in the Output Overlays step of a Water Overlay wizard when the impacted buildings result is selected as an output overlay.
Icon | Attribute | Unit | Range | Description | Default value |
---|---|---|---|---|---|
![]() |
IMPACT_FLOOD_THRESHOLD_M | m | The amount of water a Building must experience before it is considered impacted by water. | 0,1 |
Water must reach this height either on one of the cells the Building is on, or on one of the cells adjacent to it. With the impact range m attribute the width of the water along the facade can be adjusted. This is used to compute the Impacted buildings result type.