Limit area model attribute (Water Overlay)

From Tygron Support wiki
Jump to navigation Jump to search
Icon Attribute Unit Range Description Default value
LIMIT_AREA nominal value Whether and how calculations in the simulation should be limited to specific locations of the 3D world. n/a

There are a few modes available for the Water Module, dictating where calculations are to be performed:

  • Entire map. Calculations are performed across the entire map. Water can flow anywhere.
  • Limit to Water Level Areas Calculations are only performed in the locations where water level areas are present.
  • Limit to specific Areas Calculations are only performed in the locations where limitation areas are present.

Possible values

  • 0: Entire map
  • 1: Limit to Water Level Areas
  • 2: Limit to specific Areas

Notes

  • When any limit is in effect, water can flow between valid locations, even if those locations are defined through different relevant features (e.g. 2 adjacent water level areas).
  • In step 1 of the Water Overlay Wizard, the to be calculated area can be selected. When chosen for the option Limit to specified areas, an extra step in the wizard is added.

How-to's

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Limit_area_model_attribute_(Water_Overlay)&oldid=39001"