Breach measurement distance m (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 5: Line 5:
|description=Distance behind the breach area for placing a more stable water level measurement.
|description=Distance behind the breach area for placing a more stable water level measurement.
|defaultvalue=100
|defaultvalue=100
|icon=breach_measurement_distance_m.png
|icon=waterwizard_icon_breach_measurement_distance_m.png
}}</onlyinclude>}}
}}</onlyinclude>}}


Revision as of 14:52, 15 September 2022

Icon Key Unit Range Description Default value
Waterwizard icon breach measurement distance m.png BREACH_MEASUREMENT_DISTANCE_M m Distance behind the breach area for placing a more stable water level measurement. 100

Notes

  • Distance behind the breach for placing a more stable water level measurement, used in the Verheij–van der Knaap growth formula.
  • In order to place the measurement the breach area must have a BREACH_ANGLE.
  • Only when the area behind the breach is lower then the breach level itself the measurement point can be placed. This prevents invalid measurements behind e.g. buildings.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Breach_measurement_distance_m_(Water_Overlay)&oldid=46517"