Elevation (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(20 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The terrain height defines the height of the terrain on and in which the hydrology is modeled. Terrain height includes the relief on the surface of dry land, but also the height of the stream beds of water bodies.
The [[elevation model]] defines the height of the terrain on and in which the hydrology is modeled. Elevation includes the relief on the surface of dry land, but also the height of the stream beds of water bodies.


By default the terrain height model will be derived from data sources relevant to the geographical location of the project area. However, especially in water bodies the level of detail of the terrain height may be insufficient. For these situations it's possible to load in a(n additional) [[GeoTiff]] of terrain heights, load in a [[GeoJSON]] file with water depths, or [[elevation tool|manually modify the elevation model]].
By default the [[elevation model]] will be derived from data sources relevant to the geographical location of the project area. However, especially in water bodies the level of detail of the elevation model may be insufficient. For these situations it's possible to load in a(n additional) [[GeoTIFF]] defining elevations, load in a [[GeoJSON]] file with water depths, or [[terrain height brush|manually modify the elevation model]].


In addition to the base terrain height, the height of [[construction]]s is also taken into account. [[Breach (Water Overlay)|Breach]]es are also embedded into the resulting Digital Surface Model the [[Water Module]] calculates with.
In addition to the [[elevation model]], the height of [[building]]s is also taken into account. [[Breach (Water Overlay)|Breach]]es are also embedded into the resulting [[Elevation model (Water Overlay)|Digital Surface Model]] the [[Water Module]] uses for its calculations.


During a session, a number of actions can directly affect the terrain height. Actions such as the creation of [[levee]]s, or the creation of open water, both affect the topography. Placing or removing constructions also affects the terrain height, in terms of where water can flow.
During a session, a number of [[action]]s can directly affect the terrain height. [[Action]]s such as the creation of [[levee]]s, or the creation of open water, both affect the topography. Placing or removing [[building]]s also affects the terrain height, in terms of where water can flow.


{{GeoTIFFSpec
Alternatively, the elevation can be supplied by an other grid overlay, and configured using the [[Terrain elevation prequel (Water Overlay)|Terrain elevation prequel]]. This can be useful in case you do not want to change the elevation model of your project. However, the prequel overlay must be calculated in advance and must be set to inactive in order for it to be used by the water overlay.
|title=Terrain height
|description=The height of the terrain's surface across the project area.
|nodata=Data is unchanged from the base terrain height.
|value=Terrain height
|unit={{mdatum}}
}}


==How to's==
{{article end
* [[Terrain_height#Import_your_own_DTM|How to load in terrain height using a GeoTiff]]
|notes= '''Reconstruction''': No matter which option is configured for the elevation of a water overlay, it still will be reconstructed according to the [[Elevation model (Water Overlay)|requirements of the algorithm]]. Calculated building heights ([[Design flood elevation m (Water Overlay)|to some extend]]) are also included in this reconstruction.
* [[Import_waterdepth_data_use_case_(Water_Overlay)|How to import waterdepth data]]
<gallery widths=400px heights=300px>
* [[How to load in terrain height using a GeoJSON]]
File:piecewisereconstruction_1d.png|1D linear piecewise reconstruction. Source: Kurganov and Petrova (2007)<ref name="Kurganov2" />
 
File:Inundation overlay 04 HWP(2).PNG|2D linear piecewise reconstruction. Source: Horváth et al. (2014)<ref name="Horvath"/>
==See also==
</gallery>
|howtos=
* [[How to import a GeoTIFF to change the elevation model]]
* [[How to use a Grid Overlay to change the elevation model]]
* [[How to import a GeoTIFF of waterway depths]]
* [[How to import a GeoJSON to change the elevation model]]
|seealso=
* [[Terrain elevation prequel (Water Overlay)]]
* [[Elevation model]]
* [[Subsidence (Water Overlay)]]
* [[Surface model (Water Overlay)]]
* [[Elevation model (Water Overlay)]]
* [[Breach (Water Overlay)]]
* [[Breach (Water Overlay)]]
* [[Subsidence (Water Overlay)]]
* [[Terrain height|Terrain height (General)]]
* [[Levee]]
* [[Levee]]
* [[Surface model (Water Overlay)]]
|references=
<references>
<ref name="Kurganov2">Kurganov A, Petrova G (2007) ∙ A Second-Order Well-Balanced Positivity Preserving Central-Upwind Scheme for the Saint-Venant System ∙ found at: http://www.math.tamu.edu/~gpetrova/KPSV.pdf (last visited 2018-06-29)</ref>
<ref name="Horvath">Zsolt Horváth, Jürgen Waser, Rui A. P. Perdigão, Artem Konev and Günter Blöschl (2014) ∙ A two-dimensional numerical scheme of dry/wet fronts for the Saint-Venant system of shallow water equations ∙ found at: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.700.7977&rep=rep1&type=pdf ∙ http://visdom.at/media/pdf/publications/Poster.pdf ∙ (last visited 2018-06-29)</ref>
</references>
}}


{{WaterOverlay simulation data nav}}
{{WaterOverlay simulation data nav}}
{{Water Module buttons}}

Latest revision as of 16:50, 5 March 2024

The elevation model defines the height of the terrain on and in which the hydrology is modeled. Elevation includes the relief on the surface of dry land, but also the height of the stream beds of water bodies.

By default the elevation model will be derived from data sources relevant to the geographical location of the project area. However, especially in water bodies the level of detail of the elevation model may be insufficient. For these situations it's possible to load in a(n additional) GeoTIFF defining elevations, load in a GeoJSON file with water depths, or manually modify the elevation model.

In addition to the elevation model, the height of buildings is also taken into account. Breaches are also embedded into the resulting Digital Surface Model the Water Module uses for its calculations.

During a session, a number of actions can directly affect the terrain height. Actions such as the creation of levees, or the creation of open water, both affect the topography. Placing or removing buildings also affects the terrain height, in terms of where water can flow.

Alternatively, the elevation can be supplied by an other grid overlay, and configured using the Terrain elevation prequel. This can be useful in case you do not want to change the elevation model of your project. However, the prequel overlay must be calculated in advance and must be set to inactive in order for it to be used by the water overlay.

Notes

Reconstruction: No matter which option is configured for the elevation of a water overlay, it still will be reconstructed according to the requirements of the algorithm. Calculated building heights (to some extend) are also included in this reconstruction.

  • 1D linear piecewise reconstruction. Source: Kurganov and Petrova (2007)[1]

  • 2D linear piecewise reconstruction. Source: Horváth et al. (2014)[2]

How-to's

See also

References

  1. ↑ Kurganov A, Petrova G (2007) ∙ A Second-Order Well-Balanced Positivity Preserving Central-Upwind Scheme for the Saint-Venant System ∙ found at: http://www.math.tamu.edu/~gpetrova/KPSV.pdf (last visited 2018-06-29)
  2. ↑ Zsolt Horváth, Jürgen Waser, Rui A. P. Perdigão, Artem Konev and Günter Blöschl (2014) ∙ A two-dimensional numerical scheme of dry/wet fronts for the Saint-Venant system of shallow water equations ∙ found at: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.700.7977&rep=rep1&type=pdf ∙ http://visdom.at/media/pdf/publications/Poster.pdf ∙ (last visited 2018-06-29)
Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Weather
Rain m • Evaporation m
Prequels
Bottom distance • Bottom pressure • Bottom resistance • Ground conductivity • Groundwater datum • Groundwater depth • Manning • Max infiltration • Microrelief • Surface level • Surface u • Surface v • Terrain elevation • Unsaturated fraction
Elevation
Elevation
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Model attributes • Results
Retrieved from "https://support.tygron.com/w/index.php?title=Elevation_(Water_Overlay)&oldid=60196"