Avg shore width m (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:


<gallery mode=nolines>
<gallery mode=nolines>
File:Wateroverlay_avg_shore_width_3m.png|Water Overlay with set to [[Surface water (Water Overlay)|Grid Averaging Waterways]] and an average shore width of 3m.
File:Wateroverlay_avg_shore_width_3m.png|[[Water Overlay]] set to [[Surface water (Water Overlay)|Grid Averaging Waterways]] and a configured average shore width of 3m.
File:Wateroverlay_avg_shore_width_10m.png|Water Overlay with set to [[Surface water (Water Overlay)|Grid Averaging Waterways]] and an average shore width of 10m.
File:Wateroverlay_avg_shore_width_10m.png|[[Water Overlay]] set to [[Surface water (Water Overlay)|Grid Averaging Waterways]] and a configured average shore width of 10m.
File:Wateroverlay_difference_waterlevel_avg_shorewidth.png|Difference in [[Surface last value result type (Water Overlay)|water level]].
File:Wateroverlay_difference_waterlevel_avg_shorewidth.png|Difference in [[Surface last value result type (Water Overlay)|water level]].
</gallery>
</gallery>

Revision as of 15:28, 29 January 2024

Average shore width can be configured in the Simulation Settings step.

Water polygons supplied by Geo data often do not include the shorelines around it, which could still contain water due to overflowing. Additionally, shorelines are important for the interaction between ground water and water ways.

Notes

  • This option is only used when the surface water mode is set to Grid Averaging.
  • As indicated by the range, the average shore width is converted to a grid cell amount; the average shore width is divided by the grid cell size.

How-to's