Weir move range m (Water Overlay)
Revision as of 13:34, 18 November 2022 by Maxim@tygron.com (talk | contribs) (Created page with "{{Overlay attributes|<onlyinclude> {{Overlay attributes|type=row|overlay=Water |attribute=WEIR_MOVE_RANGE_M |unit=seconds |description=When the Weir height is adjusted up/down it is clamped by this value in meters. |icon=weir_drop_time.png |defaultvalue=10 }}</onlyinclude>}} {{article end |notes= * There is only one general interval time configured, applied to all weirs that have a target level. |seealso= * Weir target level (Water Overlay) * Weir height (Water...")
| Icon | Attribute | Unit | Range | Description | Default value |
|---|---|---|---|---|---|
 |
WEIR_MOVE_RANGE_M | seconds | When the Weir height is adjusted up/down it is clamped by this value in meters. | 10 |
Notes
- There is only one general interval time configured, applied to all weirs that have a target level.
See also
- Group
- Model attributes
- Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
- Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
- Related