Weir move interval s (Water Overlay)

Icon	Attribute	Unit	Range	Description	Default value
	WEIR_DROP_TIME_S	seconds		The amount of time in seconds a Weir drops down fully when the water level on one of its sides is above the configured water level drop threshold. The configuration of the water level drop threshold is optional per Weir. The time counting will commence once the weir has dropped. After that time period, the Weir is set at its configured height again and the drop condition is re-evaluated.	3600

Notes

• There is only one general drop time configured, applied to all weirs that can potentially drop down.

See also

• Weir drop threshold (Water Overlay)
• Weir height (Water Overlay)
• Weir formula (Water Overlay)

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Group

Model attributes

Model attributes

Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s

Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m

Related

Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data