Avg terrain storage m (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 5: Line 5:
|description=When determining the water level of a land cell that will be averaged, the level will ignore the part that is reserved for storage.  
|description=When determining the water level of a land cell that will be averaged, the level will ignore the part that is reserved for storage.  
|defaultvalue=0,05
|defaultvalue=0,05
|icon=waterwizard_icon_avg_terrain_storage_m.png
|icon=
}}</onlyinclude>}}
}}</onlyinclude>}}


Revision as of 12:07, 27 October 2022

Icon Attribute Unit Range Description Default value
AVG_TERRAIN_STORAGE_M length When determining the water level of a land cell that will be averaged, the level will ignore the part that is reserved for storage. 0,05

This storage amount will allow water to infiltrate into the surface and evaporate, before being averaged away into the water way.

Notes

  • This option is only used when the surface water mode is set to Avg Terrain, Avg Shoreline and Hybrid. In the later two cases, the situations in which this occurs is very limited, only for Sewer and drainage cells, since land type cells are not assigned for these modes.

How-to's

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Avg_terrain_storage_m_(Water_Overlay)&oldid=48340"