Terrain water evaporation factor (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
Line 10: Line 10:


===Notes===
===Notes===
* Because the model assumes evaporation due to plants on the surface, the [[Water Module]] looks at the surface terrain type for this attribute.
* When a construction is present in any given location, the values for evaporation of the construction will overrule any values set by terrain in the same location. This is also true if the construction has its evaporation values set to 0; they will overrule the terrain's values and thus not allow evaporation of underground water to occur.
* When a construction is present in any given location, the values for evaporation of the construction will overrule any values set by terrain in the same location. This is also true if the construction has its evaporation values set to 0; they will overrule the terrain's values and thus not allow evaporation of underground water to occur.
* The groundwater level reduction is inversely proportional to the [[terrain water storage percentage (Water Overlay)|WATER_STORAGE_PERCENTAGE]], as the contribution of a given volume of water to the groundwater level increases when the capacity for water storage in the underground layer decreases.
* The groundwater level reduction is inversely proportional to the [[terrain water storage percentage (Water Overlay)|WATER_STORAGE_PERCENTAGE]], as the contribution of a given volume of water to the groundwater level increases when the capacity for water storage in the underground layer decreases.

Revision as of 08:37, 20 June 2019

Template:Overlay attribute

Plants

Terrains can be configured with plant-related attributes, similar to constructions configured as crops and foliage, allowing it to draw water from the underground and evaporate it.

Notes

  • When a construction is present in any given location, the values for evaporation of the construction will overrule any values set by terrain in the same location. This is also true if the construction has its evaporation values set to 0; they will overrule the terrain's values and thus not allow evaporation of underground water to occur.
  • The groundwater level reduction is inversely proportional to the WATER_STORAGE_PERCENTAGE, as the contribution of a given volume of water to the groundwater level increases when the capacity for water storage in the underground layer decreases.

How-to's

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Terrain attributes
Ground infiltration md •  Hydraulic conductivity md •  Hydraulic conductivity with thickness md •  Root depth m •  Water •  Water evaporation factor •  Water manning •  Water microrlief m •  Water storage percentage
Related
Building attributes • Hydrological features • Hydraulic structures • Model attributes • Results • Simulation data


Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Retrieved from "https://support.tygron.com/w/index.php?title=Terrain_water_evaporation_factor_(Water_Overlay)&oldid=25807"