Weir move interval s (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
m (Maxim@tygron.com moved page Weir drop time s (Water Overlay) to Weir move interval s (Water Overlay) without leaving a redirect)
No edit summary
Line 1: Line 1:
{{Overlay attributes|<onlyinclude>
{{Overlay attributes|<onlyinclude>
{{Overlay attributes|type=row|overlay=Water  
{{Overlay attributes|type=row|overlay=Water  
|attribute=WEIR_DROP_TIME_S
|attribute=WEIR_MOVE_INTERVAL_S
|unit=seconds
|unit=seconds
|description=The amount of time in seconds a Weir drops down fully when the water level on one of its sides is above the configured water level drop threshold. The configuration of the water level drop threshold is optional per Weir. The time counting will commence once the weir has dropped. After that time period, the Weir is set at its configured height again and the drop condition is re-evaluated.
|description=Interval between Weir height adjustments in seconds. The Weir moves up/down to reach the target upstream water level.
|icon=weir_drop_time.png
|icon=weir_drop_time.png
|defaultvalue=3600
|defaultvalue=3600
Line 11: Line 11:
{{article end
{{article end
|notes=
|notes=
* There is only one general drop time configured, applied to all weirs that can potentially drop down.
* There is only one general interval time configured, applied to all weirs that have a target level.
|seealso=
|seealso=
* [[Weir drop threshold (Water Overlay)]]
* [[Weir drop threshold (Water Overlay)]]

Revision as of 13:31, 18 November 2022

Icon Attribute Unit Range Description Default value
Weir drop time.png WEIR_MOVE_INTERVAL_S seconds Interval between Weir height adjustments in seconds. The Weir moves up/down to reach the target upstream water level. 3600


Notes

  • There is only one general interval time configured, applied to all weirs that have a target level.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Weir_move_interval_s_(Water_Overlay)&oldid=48790"