Design flood elevation m (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Overlay attribute
{{Overlay attributes|<onlyinclude>
{{Overlay attributes|type=row|overlay=Water
|attribute=DESIGN_FLOOD_ELEVATION_M
|attribute=DESIGN_FLOOD_ELEVATION_M
|unit=m
|unit=m
|description=Constructions in the 3D world are assumed to have at most this height compared to the surface of the terrain. Greater values can create a more accurate model but will impact performance.
|description=Buildings in the model are assumed to have at most this height compared to the surface of the terrain. Greater values can create a more accurate model but will impact performance.
|defaultvalue=1
|icon=waterwizard_icon_design_flood_elevation_m.png
}}</onlyinclude>}}
 
{{article end
|notes=
* Only values greater than or equal to 0 are permitted. Negative values will lead to undefined behavior.
* To lower the height of [[Building]]s below the normal [[terrain height]], a [[Terrain elevation prequel (Water Overlay)|prequel]] should be used instead.
|howtos=
* [[How to add and remove an Attribute]]
}}
}}


==How-to's==
{{WaterOverlay model attribute nav}}
* [[How-to add and remove an attribute|Add and remove an attribute]]
 
{{WaterOverlay_model_attribute_nav}}
{{Water Module buttons}}

Latest revision as of 16:04, 17 January 2023

Icon Attribute Unit Range Description Default value
Waterwizard icon design flood elevation m.png DESIGN_FLOOD_ELEVATION_M m Buildings in the model are assumed to have at most this height compared to the surface of the terrain. Greater values can create a more accurate model but will impact performance. 1

Notes

  • Only values greater than or equal to 0 are permitted. Negative values will lead to undefined behavior.
  • To lower the height of Buildings below the normal terrain height, a prequel should be used instead.

How-to's

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Model attributes
Allowed water increase m • Avg shore width m • Avg terrain width m • Avg terrain storage m • Breach measurement distance m • Bridge elevation • Culvert dem threshold m • Design flood elevation m • Extended reconstruction • Ground bottom distance m • Ground bottom pressure m • Ground water • Ground water depth m • Ground watertable with surface • Impact flood threshold m • Impact range m • Increased resolution • Infiltration factor s
Limit area • Limit rain • Max infiltration m • Max water bottom m • Microrelief storage fraction • Min max elevation • Object entry correction • Prequel surface level relative • Rise rate distance m • Sewer overflow threshold • Shoreline • Show duration flood level m • Stabilizer angle • Start date ms • Surface water • Surface water evaporation factor • Timeframe times • Timeframes • Unsaturated fraction • Weir dam multiplier • Weir move interval s • Weir move range m • Weir move step m
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Design_flood_elevation_m_(Water_Overlay)&oldid=49627"