Water stress result type (Water Overlay)
Jump to navigation
Jump to search
| Icon | Result type | Unit | Mode | Description |
|---|---|---|---|---|
 |
WATER_STRESS | m (mm)¹ | Maximum | The amount of water on the surface, similar to SURFACE_MAX_VALUE. Ignores water on water terrains unless it exceeds ALLOWED_WATER_INCREASE_M. |
¹ the units between () are as displayed in the Tygron Client. If exported to GeoTIFF the SI-convention is used: meters (m) and seconds (s).
Any water on the surface is considered water stress. Open water acts as a buffer, so increased levels are not necessarily considered stress unless they increase too much. "Too much" is defined by the ALLOWED_WATER_INCREASE_M attribute. As long as that amount of water is not exceeded, water stress in that location is considered 0.
See also
- Surface model (Water Overlay)
- Surface max value result type (Water Overlay)
- Allowed water increase m (Water Overlay)
API Endpoints
- Group
- Surface
- Building last storage • Evapotranspiration • Flood arrival time • Flood rise rate • Last evapotranspiration • Last rain • Rain
- Surface avg direction • Surface duration • Surface elevation • Surface evaporation • Surface flow • Surface last datum • Surface last direction • Surface last evaporation • Surface last flow • Surface last speed • Surface last value • Surface last u • Surface last v • Surface max speed • Surface max value • Water stress
- Underground
- Ground bottom flow • Ground flow • Ground last direction • Ground last storage • Ground last value • Ground last transpiration • Ground last unsaturated storage • Ground last unsaturated fraction • Ground max storage • Ground max value • Ground transpiration • Ground watertable
- Sewer
- Sewer last value • Sewer max value
- Substances
- Base types • Debug uv • Debug uv direction • Debug avg areas • Debug waterways • Gpu overview • Impacted buildings • Surface difference
- Related