Terrain elevation prequel (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:
This prequel serves as a replacement for the DTM, which is the elevation model without the [[Building]]s. The [[Water Overlay]] will still add the heights of any [[Building]]s present, in accordance with the set [[design flood elevation m (Water Overlay)|DESIGN_FLOOD_ELEVATION M]].
This prequel serves as a replacement for the DTM, which is the elevation model without the [[Building]]s. The [[Water Overlay]] will still add the heights of any [[Building]]s present, in accordance with the set [[design flood elevation m (Water Overlay)|DESIGN_FLOOD_ELEVATION M]].


Note: This prequel Overlay must be set to "inactive" in order to function properly!
Note: This prequel Overlay must be set to [[How to set an Overlay to active or inactive|inactive]] in order to function properly!


{{article end
{{article end

Revision as of 08:47, 30 November 2023


This prequel serves as a replacement for the DTM, which is the elevation model without the Buildings. The Water Overlay will still add the heights of any Buildings present, in accordance with the set DESIGN_FLOOD_ELEVATION M.

Note: This prequel Overlay must be set to inactive in order to function properly!

Notes

  • The values in this prequel grid are clamped between -10000.0 and 10000.0. No data values are not allowed.
  • Any Grid Overlay used as input for this prequel should cover the project area completely, without any NO_DATA values. If the dataset used does contain NO_DATA values, it is prudent to use a Combo Overlay or an Average Overlay to fill up any NO_DATA values, and use that Grid Overlay as input for this prequel instead.

See also