Testbed water module
This page provides an overview and explanation about the Testbed water module project, available for all users.
About the project
The project Testbed water module is available for all users and can be found in the main menu under Edit projects. This project does not count for your license. In the testbed project, several components of the Water Module are visible. It can serve as a working demo to further explore the details of the available components, the models and formula's behind these components and configurable parameters of these components.
Contents
The testbed demonstrates the following components of the Water Module:
- Flooding related components
- Rainfall related components
- Hydraulic structures
- Groundwater related components
For the testbed, see the quadrant named: Flooding, breaches and inundation. This quadrant demonstrates a flooding, due to breaches in the levees and the flow of several substances in the accumulated amount of water.
Analyse the quadrant:
- Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.
- Go to the Flooding Overlay in the Overlay bar. Play the flooding overlay. This overlay shows the Surface last value result type.
- Go to the Direction result type and notice how the water surrounds the construction in the middle of the quadrant.
- Take a look at the Chloride, Phosfor and Nitrogen Overlays and notice how these substances are distributed in the water.
- Open the flooding wizard and take a look at the settings for the flood event, breach areas, inundation areas and output overlays.
More information on each component:
- Flooding overlay
- Breach
- Inundated area
- Substance ABCD Overlays and the Substance flow model
Rain and sewage
For the testbed, see the quadrant named: Rain and sewage. This quadrant demonstrates flooding due to rainfall and the workings of the sewer system.
Analyse the quadrant:
- Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.
- Go to the Rainfall Flooding in the Overlay bar. Play the Rainfall flooding overlay and notice that the rain falls on the whole four quadrants. This overlay shows the water stress result type.
- Go to the Base types result type and notice that the buildings and roads are connected to the sewer.
- Take a look at the Chloride, Phosfor and Nitrogen Overlays and notice how these substances are distributed in the water.
- Open the flooding wizard and take a look at the settings for the flood event, breach areas, inundation areas and output overlays.
More information on each component:
- Flooding overlay
- Breach
- Inundated area
- Substance ABCD Overlays and the Substance flow model
- Rain (Weather)
- Surface flow and runoff
- Evaporation
- Infiltration
- Sewer infiltration
- Sewer overflow
- Water storage (for example: Green roof)