Elevation (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 28: Line 28:


{{WaterOverlay simulation data nav}}
{{WaterOverlay simulation data nav}}
{{Water Module buttons}}

Revision as of 16:08, 10 June 2020

The terrain height defines the height of the terrain on and in which the hydrology is modeled. Terrain height includes the relief on the surface of dry land, but also the height of the stream beds of water bodies.

By default the terrain height model will be derived from data sources relevant to the geographical location of the project area. However, especially in water bodies the level of detail of the terrain height may be insufficient. For these situations it's possible to load in a(n additional) GeoTiff of terrain heights, load in a GeoJSON file with water depths, or manually modify the elevation model.

In addition to the base terrain height, the height of constructions is also taken into account. Breaches are also embedded into the resulting Digital Surface Model the Water Module calculates with.

During a session, a number of actions can directly affect the terrain height. Actions such as the creation of levees, or the creation of open water, both affect the topography. Placing or removing constructions also affects the terrain height, in terms of where water can flow.

Terrain height GeoTIFF specification
Description The height of the terrain's surface across the project area.
In case of no data: Data is unchanged from the base terrain height.
Value Terrain height (m + datum)

How to's

See also