Testbed water module: Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 4: Line 4:
===About the project===
===About the project===
The project Testbed water module is available for all users and can be found in the main menu under Edit projects. This project does not count for your license.  
The project Testbed water module is available for all users and can be found in the main menu under Edit projects. This project does not count for your license.  
In the testbed project, several components of the [[Water Module]] are visible. It can serve as a working demo to further explore the details of the available components, the models and formula's behind these components and configurable parameters of these components.
In the testbed project, several components of the [[Water Module]] are visible. It can serve as a working demo to further explore the details of the available components, the models and formula's behind them and to configurable parameters of these components.


====Contents====
====Contents====
Line 14: Line 14:


===1. Flooding related components===
===1. Flooding related components===
For the testbed, see the quadrant named: Flooding, breaches and inundation. This quadrant demonstrates a flooding, due to breaches in the levees and the flow of several substances in the accumulated amount of water.
[[File:Flooding_testbed.JPG|thumb|right|300px|Flooding, breaches and inundation]]
For the testbed, see the quadrant named: ''Flooding, breaches and inundation''. This quadrant demonstrates a flooding, due to breaches in the levees and the flow of several substances in the accumulated amount of water.


Analyse the quadrant:
Analyse the quadrant:
# Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.  
# Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.  
# Go to the Flooding Overlay in the Overlay bar. Play the flooding overlay. This overlay shows the [[Surface_last_value_result_type_(Water_Overlay)|Surface last value]] result type.
# Go to the Flooding Overlay (named ''1. Flooding'') in the Overlay bar. Play the flooding overlay. This overlay shows the [[Surface_last_value_result_type_(Water_Overlay)|Surface last value]] result type.
# Go to the [[Surface_direction_result_type_(Water_Overlay)|Direction]] result type and notice how the water surrounds the construction in the middle of the quadrant.  
# Go to the [[Surface_direction_result_type_(Water_Overlay)|Direction]] result type and notice how the water surrounds the construction in the middle of the quadrant.  
# Take a look at the [[Substance_ABCD_(Water_Overlay)|Substance A, Substance B and Substance C]] Overlays and notice how these substances are distributed in the water.  
# Take a look at the [[Substance_ABCD_(Water_Overlay)|Substance A, Substance B and Substance C]] Overlays and notice how these substances are distributed in the water.  
Line 31: Line 32:


===2. Rainfall related componens===
===2. Rainfall related componens===
For the testbed, see the quadrant named: Rain and sewer system. This quadrant demonstrates flooding due to rainfall and the workings of the sewer system.
[[File:Rainfall_testbed.JPG|thumb|right|300px|Rain and sewer system]]
For the testbed, see the quadrant named: ''Rain and sewer system''. This quadrant demonstrates flooding due to rainfall and the workings of the sewer system.


Analyse the quadrant:
Analyse the quadrant:
# Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.  
# Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.  
# Go to the [[Base_types_result_type_(Water_Overlay)|Base types]] result type and notice that the buildings and roads are connected to the sewer.
# Go to the [[Base_types_result_type_(Water_Overlay)|Base types]] result type (in the overlay ''2. Rainfall flooding'') and notice that the buildings and roads are connected to the sewer.
# Inspect the different functions in the quadrant.   
# Inspect the different functions in the quadrant.   
# Go to the Rainfall Flooding in the Overlay bar. Play the Rainfall flooding overlay and notice where rain puddles occur. This overlay shows the [[Waterstress_result_type_(Water_Overlay)|water stress]] result type.
# Go to the Rainfall Flooding in the Overlay bar. Play the Rainfall flooding overlay and notice where rain puddles occur. This overlay shows the [[Surface_last_value_result_type_(Water_Overlay)|surface last value]] result type.
# Open the flooding wizard and take a look at the settings for the rain event, sewer areas, sewer overflow and output overlays.
# Open the flooding wizard and take a look at the settings for the rain event, sewer areas, sewer overflow and output overlays.


Revision as of 09:41, 29 April 2019

This page provides an overview and explanation about the Testbed water module project, available for all users.

About the project

The project Testbed water module is available for all users and can be found in the main menu under Edit projects. This project does not count for your license. In the testbed project, several components of the Water Module are visible. It can serve as a working demo to further explore the details of the available components, the models and formula's behind them and to configurable parameters of these components.

Contents

The testbed demonstrates the following components of the Water Module:

  1. Flooding related components
  2. Rainfall related components
  3. Hydraulic structures
  4. Groundwater related components

1. Flooding related components

Flooding, breaches and inundation

For the testbed, see the quadrant named: Flooding, breaches and inundation. This quadrant demonstrates a flooding, due to breaches in the levees and the flow of several substances in the accumulated amount of water.

Analyse the quadrant:

  1. Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.
  2. Go to the Flooding Overlay (named 1. Flooding) in the Overlay bar. Play the flooding overlay. This overlay shows the Surface last value result type.
  3. Go to the Direction result type and notice how the water surrounds the construction in the middle of the quadrant.
  4. Take a look at the Substance A, Substance B and Substance C Overlays and notice how these substances are distributed in the water.
  5. Open the flooding wizard and take a look at the settings for the flood event, breach areas, inundation areas and output overlays.

More information on each component:

2. Rainfall related componens

Rain and sewer system

For the testbed, see the quadrant named: Rain and sewer system. This quadrant demonstrates flooding due to rainfall and the workings of the sewer system.

Analyse the quadrant:

  1. Click on the arrows in the quadrant to get familiar with the boundary conditions in the model.
  2. Go to the Base types result type (in the overlay 2. Rainfall flooding) and notice that the buildings and roads are connected to the sewer.
  3. Inspect the different functions in the quadrant.
  4. Go to the Rainfall Flooding in the Overlay bar. Play the Rainfall flooding overlay and notice where rain puddles occur. This overlay shows the surface last value result type.
  5. Open the flooding wizard and take a look at the settings for the rain event, sewer areas, sewer overflow and output overlays.

More information on each component:

  1. Rainfall overlay
  2. Rain (Weather)
  3. Sewer infiltration
  4. Sewer overflow
  5. Infiltration
  6. Water storage (for example: the parking space with a crate based system)

3. Hydraulic structures

For the testbed, see the quadrant named: Pump, culverts and weir. This quadrant demonstrates how the several hydraulic structures work.

Analyse the quadrant:

  1. Click on the arrows in the quadrant to get familiar with the different structures in the model.
  2. Inspect the different areas and their water level (named: sloot_area) in the Areas menu.
  3. Go to the Hydraulic structures overlay in the Overlay bar. Play the Substance result type and notice how the water flows.
  4. Open the wizard and take a look at the settings for the weir, culverts and pump.

More information on each component:

  1. Weir
  2. Culvert
  3. Pump

4. Groundwater

  1. Rain variation over time
  2. Evaporation variation over time
  3. Underground evaporation and vegetation root depths
  4. Underground infiltration
  5. Ground water flow
  6. Rainfall runoff
Retrieved from "https://support.tygron.com/w/index.php?title=Testbed_water_module&oldid=22788"