Evaporation m (Water Overlay)

From Tygron Support wiki
Revision as of 15:27, 28 February 2024 by Frank@tygron.nl (talk | contribs)
Jump to navigation Jump to search
Attribute Unit Description
EVAPORATION_M end-time, m An array of values, each pair indicating until what time that period of evaporation will last and what amount evaporates in that period.


Notes

Image of the evaporation model in the Water Module
  • A maximum of 10.000 values (5.000 pairs) can be defined.
  • Internally each period with amount values are converted to an evaporation rate per second at a particular time in the simulation.
  • The default value is set to 0.125 mm in 2 hours (0.000125 m in 7200 seconds), which corresponds to 1.5 mm per day. This value is based on the theory described in 2.3 Gewasverdamping[1] in the book Grondwaterzakboekje. Based on the plotted lines, it was selected as an average of march, june and september, for a cloudy rainy day.

How-to's

See also

References

  1. ↑ Fig. 2.7 referentiegewasverdamping Gewasfactoren, Bram Bot (2016) ∙ Grondwaterzakboekje, Gwz2016 ∙ Impressed druk en print
Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Weather
Rain m • Evaporation m
Prequels
Bottom distance • Bottom pressure • Bottom resistance • Ground conductivity • Groundwater datum • Groundwater depth • Manning • Max infiltration • Microrelief • Surface level • Surface u • Surface v • Terrain elevation • Unsaturated fraction
Elevation
Elevation
Related
Building attributes • Hydrological features • Hydraulic structures •  Terrain attributes • Model attributes • Results
Retrieved from "https://support.tygron.com/w/index.php?title=Evaporation_m_(Water_Overlay)&oldid=59772"