Ground conductivity prequel (Water Overlay): Difference between revisions

Latest revision as of 09:47, 15 July 2026

Name	Prequel	Underlying data	Unit	Range	No data	Description
Ground conductivity	GROUND_CONDUCTIVITY	Water Prequel	m2/day or m/day	0 10000	Clamped to range	Used for initializing the ground conductivity, with or without thickness.

The model attribute Hydraulic conductivity with thickness (Water Overlay) determines if this prequel represents ground conductivity with or without thickness.
The unit also depends on whether the prequel represents ground conductivity with or without thickness.

@@ Line 5: / Line 5: @@
 |description=Used for initializing the ground conductivity, with or without thickness.
 |range=0 10000
-|defaultvalue=
 |unit=m2/day or m/day
 }}</onlyinclude>}}
 {{article end
-|notes=* Whether or not this prequel should be interpreted as ground conductivity with or without thickness, must be configured using the model attribute [[Hydraulic conductivity with thickness (Water Overlay)]].
+|notes=* The model attribute [[Hydraulic conductivity with thickness (Water Overlay)]] determines if this prequel represents ground conductivity with or without thickness.
-* The unit used also depends on whether the prequel represents ground conductivity with or ground conductivity without thickness.
+* The unit also depends on whether the prequel represents ground conductivity with or without thickness.
 |seealso=
 * [[Hydraulic conductivity with thickness (Water Overlay)]]
 * [[Terrain hydraulic conductivity md (Water Overlay)]]
 * [[Terrain hydraulic conductivity with thickness md (Water Overlay)]]
+|api=*[[Api session event editor overlay set prequel]]
 }}
 {{WaterOverlay simulation data nav}}