How to configure constant bottom boundary flow (Water Overlay)
Revision as of 12:55, 10 February 2022 by Frank@tygron.nl (talk | contribs)
When working with the full groundwater model of the Water Overlay, underground seepage may present a significant factor in the underground water balance. For these situations, underground seepage can be configured.
For seepage to be functional, the Seepage p prequel and Seepage c prequel are required and must be prepared beforehand.
Editor → Current Situation (Ribbon tab) → Overlays (Ribbon bar) → Water Overlay (Left panel) → Configuration Wizard (Right panel) → Seepage
How to configure constant seepage:
- Open the Water Overlay Wizard, and proceed to the seepage step.
- Opt to select seepage Grid Overlays and define the seepage factor.
- For the pressure Grid, import your GeoTIFF Overlay with seepage pressure values.
- Ensure the uploaded GeoTiff Overlay is selected in the dropdown.
- For the resistance Grid, import your GeoTIFF Overlay with seepage resistance values.
- Ensure the uploaded GeoTIFF Overlay is selected in the dropdown.
- Close the configuration wizard, and recalculate the Overlay.