UK Benchmark 6 (Water Module): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
This page reports on the performance of the {{software}}'s [[Water Module]] by means of the UK EA benchmark Test 6 – Dambreak.
This [[Water Module benchmarks|benchmark]] performs ''UK EA benchmark Test 6 – Dambreak'' using the [[Water Module]] of the {{software}}.


<youtube>2UO1UdOEbtU</youtube>
<youtube>2UO1UdOEbtU</youtube>
Line 13: Line 13:
[[File:Inundation benchmark 07.PNG|600px]]
[[File:Inundation benchmark 07.PNG|600px]]


====results====
====Results====
Measured water levels and velocities were provided by UCL for six points (G1 to G6,
Measured water levels and velocities were provided by UCL for six points (G1 to G6,
except for velocities at G6). Below the result for each point.
except for velocities at G6). Below the result for each point.

Latest revision as of 15:28, 5 March 2024

This benchmark performs UK EA benchmark Test 6 – Dambreak using the Water Module of the Tygron Platform.

This dambreak test case (see Appendix A.6 for details) is the original benchmark test case available from the IMPACT project (Soares-Frazão and Zech 2002), for which measurements from a physical model at the Civil Engineering Laboratory of the Université Catholique de Louvain (UCL) are available.

Characteristics:

  • Dimensions: 20X the values below
  • Roughness: uniform manning = 0,05 m/s1/3
  • Initiële conditions: 8m in reservoir, 0,4m in floodplain
  • Modelgrid resolution: 2m

Inundation benchmark 07.PNG

Results

Measured water levels and velocities were provided by UCL for six points (G1 to G6, except for velocities at G6). Below the result for each point.

Inundation benchmark 08.PNG

Velocity profiles

Inundation benchmark 09.PNG

References

  1. Environmetal Agency (2013). Benchmarking the latest generation of 2D hydraulic modelling packages ∙ report Report – SC120002 ∙ found at: https://consult.environment-agency.gov.uk/engagement/bostonbarriertwao/results/appendix-6---neelz--s.---pender--g.--2013--benchmarking-the-latest-generation-of-2d-hydraulic-modelling-packages.-bristol_environment-agency.pdf (last visited 2018-08-03)