UK Benchmark 6 (Water Module): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
 
(27 intermediate revisions by 5 users not shown)
Line 1: Line 1:
==UK Benchmarks==
This [[Water Module benchmarks|benchmark]] performs ''UK EA benchmark Test 6 – Dambreak'' using the [[Water Module]] of the {{software}}.


===Benchmark 2===
<youtube>2UO1UdOEbtU</youtube>


====description====
This dambreak test case (see Appendix A.6 for details) is the original benchmark test case available from the IMPACT project (Soares-Frazão and Zech 2002), for which measurements from a physical model at the Civil Engineering Laboratory of the Université Catholique de Louvain (UCL) are available.
Engine version: 2019.0.0 DEV 66.0
Date executed: 2018-07-10


Characteristics:
Characteristics:
A test for the evaluation of an inundation pattern and depth at low momentum over a complex topography:
* Dimensions: 20X the values below
* Dimensions: 2000m X 200m
* Roughness: uniform manning = 0,05 m/s1/3
* Roughness: uniform manning = 0,03 m/s1/3
* Initiële conditions: 8m in reservoir, 0,4m in floodplain
* Initial conditions: empty grid
* Modelgrid resolution: 2m
* Resolution: 20m grid
* Boundary condition: Q(t) in North-East side of the model domain


note: the benchmark was executed on a 10m, instead of 20m
[[File:Inundation benchmark 07.PNG|600px]]


[[File:Inundation benchmark 01.PNG]]
====Results====
Measured water levels and velocities were provided by UCL for six points (G1 to G6,
except for velocities at G6). Below the result for each point.


====results====
[[File:Inundation benchmark 08.PNG]]
Water levels every 300 secs on the centre of every depression are requested together with a map of the waterdepts at the end of simulation.


The waterdepth at the end of simulation is shown below
Velocity profiles


[[File:Inundation benchmark 02.PNG]]
[[File:Inundation benchmark 09.PNG]]


And graphs of water levels at the centre of every depression:
==References==
# Environmetal Agency (2013). Benchmarking the latest generation of 2D hydraulic modelling packages ∙ report Report – SC120002 ∙ found at: https://consult.environment-agency.gov.uk/engagement/bostonbarriertwao/results/appendix-6---neelz--s.---pender--g.--2013--benchmarking-the-latest-generation-of-2d-hydraulic-modelling-packages.-bristol_environment-agency.pdf (last visited 2018-08-03)


[[File:Inundation benchmark 03.PNG]]
[[Category:Benchmarks]]
 
{{Water Module buttons}}
[[File:Inundation benchmark 04.PNG]]
 
===Benchmark 3===
 
====description====
Engine version: 2019.0.0 DEV 68.0
Date executed: 2018-07-11
 
Characteristics:
Test for conservation of momentum over a small obstruction. By inertia (flow changing over time) some water flows over the obstruction.
* Dimensies: zie Figuur below
* Roughness: uniform manning = 0,01 m/s1/3
* Initial condition: 0m water depth
* Resolution: 5m grid
* Boundary condition: Q(t), see figure below
 
[[File:Inundation benchmark 05.PNG|400px]]
 
====results====
Results every 2 seconds in the middle of every despression are requested and shown below
 
 
[[File:Inundation benchmark 06.PNG]]

Latest revision as of 15:28, 5 March 2024

This benchmark performs UK EA benchmark Test 6 – Dambreak using the Water Module of the Tygron Platform.

This dambreak test case (see Appendix A.6 for details) is the original benchmark test case available from the IMPACT project (Soares-Frazão and Zech 2002), for which measurements from a physical model at the Civil Engineering Laboratory of the Université Catholique de Louvain (UCL) are available.

Characteristics:

  • Dimensions: 20X the values below
  • Roughness: uniform manning = 0,05 m/s1/3
  • Initiële conditions: 8m in reservoir, 0,4m in floodplain
  • Modelgrid resolution: 2m

Inundation benchmark 07.PNG

Results

Measured water levels and velocities were provided by UCL for six points (G1 to G6, except for velocities at G6). Below the result for each point.

Inundation benchmark 08.PNG

Velocity profiles

Inundation benchmark 09.PNG

References

  1. Environmetal Agency (2013). Benchmarking the latest generation of 2D hydraulic modelling packages ∙ report Report – SC120002 ∙ found at: https://consult.environment-agency.gov.uk/engagement/bostonbarriertwao/results/appendix-6---neelz--s.---pender--g.--2013--benchmarking-the-latest-generation-of-2d-hydraulic-modelling-packages.-bristol_environment-agency.pdf (last visited 2018-08-03)