Pump (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
Line 6: Line 6:
|unit=m3/s
|unit=m3/s
|description=The speed at which water is pumped from the lower end-point to the higher end-point.
|description=The speed at which water is pumped from the lower end-point to the higher end-point.
|defaultvalue=n/a
|defaultvalue=0
|icon=[[File:waterwizard_icon_pump_q.png]]
|icon=[[File:waterwizard_icon_pump_q.png]]
|attribute2=[[Lower_threshold_(Water_Overlay)|LOWER_THRESHOLD]]
|attribute2=[[Lower_threshold_(Water_Overlay)|LOWER_THRESHOLD]]
Line 21: Line 21:
|unit4=m3/s
|unit4=m3/s
|description4=The maximum possible m3 water that can flow through this Pump.
|description4=The maximum possible m3 water that can flow through this Pump.
|defaultvalue4=n/a
|defaultvalue4=0
|icon4=[[File:waterwizard_icon_inlet_capacity.png]]
|icon4=[[File:waterwizard_icon_inlet_capacity.png]]
}}
}}

Revision as of 09:04, 4 April 2019

Pumps are constructions which can move water against its natural flow. Specifically, a pump with a positive pump speed will pump water from the entry point with the lowest initial water level to the entry point with the highest water level. If no water level is defined for an entry point, the surface height is taken.

Waterwizard icon pump q.png A pump is a line-based constructions. Template:Overlay attribute

Notes

  • A negative value for the PUMP_Q attribute is also allowed, in which case water can be pumped in the reverse direction.

See also

Template:WaterOverlay object nav