Culvert threshold (Water Overlay) and Sewer overflow (Water Overlay): Difference between pages

From Tygron Support wiki
(Difference between pages)
Jump to navigation Jump to search
mNo edit summary
 
mNo edit summary
 
Line 1: Line 1:
{{Template:Overlay attribute
Sewer overflows are points where water is moved from the sewer area to the above-ground water system. A sewer overflow will allow water to flow through if the water in the sewer exceeds the [[Sewer_overflow_threshold_model_attribute_(Water_Overlay)|SEWER_OVERFLOW_THRESHOLD]], and the water in the connected sewer exceeds the height of the terrain at the location of the sewer overflow. It will then function for all sewers part of that sewer area.
|icon=[[File:waterwizard_icon_culvert_height.png]]
 
|attribute=CULVERT_HEIGHT
[[File:waterwizard_icon_sewer_overflow.png]] A sewer overflow is a {{inlink|lcase=1|Point-based constructions}}. It must intersect with a [[Sewer_area_(Water_Overlay)|Sewer area]] and a [[Water_level_area_(Water_Overlay)|water level area]], but does not need to intersect with an actual sewered construction.
{{Overlay attribute
|attribute=[[Sewer_overflow_attribute_(Water_Overlay)|SEWER_OVERFLOW]]
|unit={{mdatum}}
|unit={{mdatum}}
|description=The height of the inner side of the culvert's underside (or the threshold height at which water starts flowing through the culvert). When set to a level below the terrain height at either end-point, the culvert's height will automatically attain a value equal to that of the highest [[terrain height (Water Overlay)|terrain]] found at either of its endpoints.
|description=The height at which the Sewer Overflow is situated. The average height at which the related Sewer Area will be situated is relative to this height.
|devaultvalue=0
|defaultvalue=n/a
|icon=[[File:waterwizard_icon_sewer_overflow_height.png]]
|attribute2=[[Sewer_overflow_speed_(Water_Overlay)|SEWER_OVERFLOW_SPEED]]
|unit2=m<sup>3</sup>/s
|description2=The maximum speed by which the water flows through the overflow.
|defaultvalue2=10
|icon2=[[File:waterwizard_icon_sewer_overflow_speed.png]]
}}
}}
==Note==
* At most one overflow can exist per sewer area.
* Water will flow when the water height in the Sewer is larger then the Overflow Threshold.
* Sewer overflows will only be created when all sewer areas in which a sewer overflow is placed also intersect with a water level area.
==See also==
* [[Sewer_Overflow_formula_(Water_Overlay)|Sewer overflow formula]]
* [[Sewer_area_(Water_Overlay)|Sewer Area]]
* [[Sewer_model_(Water_Overlay)|Sewer Model]]
{{WaterOverlay hydraulic structure nav}}
{{WaterOverlay hydraulic structure nav}}
{{Water Module buttons}}
{{Water Module buttons}}

Revision as of 12:28, 19 June 2019

Sewer overflows are points where water is moved from the sewer area to the above-ground water system. A sewer overflow will allow water to flow through if the water in the sewer exceeds the SEWER_OVERFLOW_THRESHOLD, and the water in the connected sewer exceeds the height of the terrain at the location of the sewer overflow. It will then function for all sewers part of that sewer area.

Waterwizard icon sewer overflow.png A sewer overflow is a point-based constructions. It must intersect with a Sewer area and a water level area, but does not need to intersect with an actual sewered construction. Template:Overlay attribute

Note

  • At most one overflow can exist per sewer area.
  • Water will flow when the water height in the Sewer is larger then the Overflow Threshold.
  • Sewer overflows will only be created when all sewer areas in which a sewer overflow is placed also intersect with a water level area.

See also