Traffic Model: Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
Line 15: Line 15:


==Traffic Data==
==Traffic Data==
When creating a [[Main Menu#New Project|new project]] a traffic model is generated for the selected project area, based on available open data sources. The following datasets are used:  
When creating a [[Wizard|new project]] a traffic model is generated for the selected project area, based on available open data sources. The following datasets are used:  


* [[GEO_Data#Used_Datasets|NSL Monitoringstool]]
* [[GEO_Data#Used_Datasets|NSL Monitoringstool]]

Revision as of 14:49, 30 March 2020

Please note: This page is currently being updated.

Template:Learned

What is a Traffic Model

From Wikipedia, the free encyclopedia

A traffic model is a mathematical model of real-world traffic, usually, but not restricted to, road traffic. Traffic modeling draws heavily on theoretical foundations like network theory and certain theories from physics like the kinematic wave model. The interesting quantity being modeled and measured is the traffic flow, i.e. the throughput of mobile units (e.g. vehicles) per time and transportation medium capacity (e.g. road or lane width).

How does a Traffic Model relate to the Tygron Platform?

The main purpose of the default traffic model in the Tygron Platform is to calculate the effects of traffic on the 3D World through traffic densities. In order to calculate this impact, data such as the number of traffic lanes, the traffic speed and the traffic flow on a particular lane can be added to the project. The traffic model is a static model that does not change by carrying out Actions, Upgrades or Measures for example. Read below how to create your own dynamic traffic model and use it in the Tygron Platform. The following overlays show data from/effects of the traffic model:

Traffic Data

When creating a new project a traffic model is generated for the selected project area, based on available open data sources. The following datasets are used:

Edit Traffic data

The right panel shows details about the selected road part

Height offset

This field specifies the height offset of a bridge.

Units per hour

This field specifies the number of units that can drive on a road in an hour.

Lanes

This field specifies the number of lanes that a road can have.

Noise Sigma

This field specifies the correction factor at reference traffic speed [1].
This value is used in the calculation of the Traffic Noise (Overlay).

Noise Tau

This field specifies the correction factor per 10 km/hour deviation from reference traffic speed [2].
This value is used in the calculation of the Traffic Noise (Overlay).

Speedlimit

This field specifies the max allowed speedlimit on road or part of a road.

Add a custom Traffic Model

It is also possible to creata and add a custom traffic model, better suited for your use case. The traffic model can be either a static model (the model and data do not change in the project) or a dynamic model (the model and data change when something in the 3D world changes).

See also