Sewer overflow (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{Water Module buttons}}
Sewer overflows are points where water is moved from the sewer area to the above-ground water system. A sewer overflow will allow water to flow through if the water in the sewer exceeds the [[Sewer_overflow_threshold_model_attribute_(Water_Overlay)|SEWER_OVERFLOW_THRESHOLD]], and the water in the connected sewer exceeds the height of the terrain at the location of the sewer overflow. It will then function for all sewers part of that sewer area.
Sewer overflows are points where water is moved from the sewer area to the above-ground water system. A sewer overflow will allow water to flow through if the water in the sewer exceeds the [[Sewer_overflow_threshold_model_attribute_(Water_Overlay)|SEWER_OVERFLOW_THRESHOLD]], and the water in the connected sewer exceeds the height of the terrain at the location of the sewer overflow. It will then function for all sewers part of that sewer area.


Revision as of 09:37, 12 June 2019

Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks


Sewer overflows are points where water is moved from the sewer area to the above-ground water system. A sewer overflow will allow water to flow through if the water in the sewer exceeds the SEWER_OVERFLOW_THRESHOLD, and the water in the connected sewer exceeds the height of the terrain at the location of the sewer overflow. It will then function for all sewers part of that sewer area.

Waterwizard icon sewer overflow.png A sewer overflow is a point-based constructions. It must intersect with a Sewer area and a water level area, but does not need to intersect with an actual sewered construction. Template:Overlay attribute

Note

  • At most one overflow can exist per sewer area.
  • Water will flow when the water height in the Sewer is larger then the Overflow Threshold.

See also

Water Module
Benchmarks button.png
Introduction button.png
Water Module
Benchmarks button.png
Getting started button.png
Tutorials
Benchmarks button.png
Overview button.png
Overview
Benchmarks button.png
Theory button.png
Theory
Benchmarks button.png
Benchmarks button.png
Benchmarks
Group
Inlet
Inlet q • Inlet area • Inlet capacity •  Lower threshold •  Upper threshold • Inlet underground
Pump
Pump q •  Lower threshold •  Upper threshold • Pump angle • Pump capacity • Pump area
Culvert
Culvert diameter • Culvert rectangular height • Culvert threshold • Culvert n
Weir
Weir height • Weir width • Weir angle • Weir coefficient • Weir target level
Sewer overflow
Sewer overflow • Sewer overflow speed
Drainage
Drainage q • Drainage datum • Drainage active • Drainage overflow threshold
Output
Object flow output • Object height output • Object datum output a • Object datum output b • Object width output
Related
Building attributes • Hydrological features •  Terrain attributes • Model attributes • Results • Simulation data
Retrieved from "https://support.tygron.com/w/index.php?title=Sewer_overflow_(Water_Overlay)&oldid=24756"