Inlet upper threshold (Water Overlay)
Jump to navigation Jump to search
|UPPER_THRESHOLD||m + datum||If an upper threshold is set, water will only flow out of the model through this inlet until the water level at the point of this Inlet is equal to or less than the threshold. If the threshold is not set, the amount of water flowing out is not limited in this fashion.||None|
- The INLET_Q should be 0 or negative. Otherwise, the Inlet is not configured to let water flow out.
- When using a dynamic UPPER_THRESHOLD, a maximum of 10.000 values (5.000 pairs) can be defined.