Inlet (Water Overlay): Difference between revisions

From Tygron Support wiki
Jump to navigation Jump to search
No edit summary
mNo edit summary
Line 5: Line 5:
|attribute=[[Inlet_q_(Water_Overlay)|INLET_Q]]
|attribute=[[Inlet_q_(Water_Overlay)|INLET_Q]]
|unit=m3/sec
|unit=m3/sec
|description=The maximum amount of water flowing into the model through this inlet. A negative value means the construction functions as an outlet, and water is removed from the hydrological model.
|description=The maximum amount of water flowing into the model through this inlet. A negative value means the construction functions as an outlet, and water is removed from the hydrological model. <!--If no thresholds exist-->
|defaultvalue=0
|defaultvalue=0
|icon=[[File:waterwizard_icon_inlet_q.png]]
|icon=[[File:waterwizard_icon_inlet_q.png]]

Revision as of 09:29, 19 June 2019

Inlets are points where water is either added to or removed from the hydrological model. It will add or remove water at a defined maximum rate, with optional thresholds for the amount of water to add or remove.

Waterwizard icon inlet.png An inlet is a point-based construction. Template:Overlay attribute

Notes

  • Each Inlet attribute functions as a limit to the flow. If multiple are defined, the flow is limited by the strongest limit. If neither an INLET_Q or any threshold is defined, there will be no flow.
  • A negative INLET_Q changes the Inlet to an Outlet.

See also