Water area (Water Overlay)

A Water level area is a means to specify the initial water level for large sections of your project area. This initial water level is only applied to water terrains. The datum height of the water level is assumed to be equal within the water level area.

If no water level areas are present, no water is initialized in the water terrains. Waterways and other water bodies will be dry at the start of the simulation (unless an inundation area is present, which performs a similar function).

If the underground model is active, and no groundwater GeoTiff is present, the underground watertable is initialized at the height defined by the water level area. Template:Overlay attribute

See also

• Inundation area (Water Overlay)

Notes

• A water level area represents real-world water level areas.
• Grid cells are marked as water by an overlapping water terrain. If a grid cell is marked as water, but is not covered by a water level area, the grid cell will not contain water.
• For waterways with a steep decline, using a single water level area to define the water level might not suffice, since the level is a datum height, not a relative offset from the bottom.

---

Water Module

Water Module

Tutorials

Overview

Theory

Benchmarks

Group

Hydrological features

Water area

Water level • Water relative

Sewer area

Sewer storage • Sewer pump speed

Inundation area

Inundation level

Aquifer

Aquifer kd • Aquifer datum

Breach

Breach height • Breach width • Breach angle • Breach coefficient • Breach speed • Breach input area • Breach level area • External surface level • External water level • External area

Rain area

Rain m

Limitation area

Limit area

Output

Object flow output • Object height output • Object datum output a • Object datum output b • Object width output

Related

Building attributes • Hydraulic structures •  Terrain attributes • Model attributes • Results • Simulation data

Water Module

Tutorials

Overview

Theory

Benchmarks