Basic Mode

What is Basic Mode?

Basic Mode is selected during project creation, and enables large projects (max 180x180 km) with a medium (5m grid) map.
Pending on the license agreement and hardware, maximum size can be smaller. Ff you can normally create 30x30 km projects, you can now create a 180x180km project in Basic Mode.
Each domain can have 3 Basic Mode projects at the same time.
Calculation grid size is set to 5x5m minimum, but larger grid sizes (10x10m, 20x20m, etc) can be selected.
The Digital Elevation Model (DTM) is set to 10x10m in Basic Mode.
To limit the high amount of polygons present in a Basic Mode project, BGT data and 3D models (buildings) will not be available.

How to add Constructions:

Right click on the list of constructions
Select 'Add' from the context menu. This adds new construction to the construction list, named "0_Building".
The new construction is not present in the 3D World yet, since no selection has been added to the Construction yet.
For details on adding / changing a selection from a construction see see below.