RE:PEAT

Applying the template

Required data

To make use of this template, two GeoJSON files are expected:

"Percelen" file, for defining plots within an area with discrete data, in the form of "plots".

"Peilgebieden" file, for grouping plots together and setting of water levels, in the form of "level areas".

Attribute	Description	Example	Remark
NAAM	The name of the plot.	PERCEEL: 1008
MVH_NAP	Height of the ground level, measured from Amsterdam Ordnance Datum (NAP).	0.45
KLEIDEKM	The depth of the clay soil layer.	0.45
GLG	The average lowest ground water level, in meters as measured from ground level.	0.75	This water level is used by the engine to calculate actual ground water levels, in combination with water level changes.
GHG	The average highest ground water level, in meters as measured from ground level.	0.35	This water level is used by the engine to calculate actual ground water levels, in combination with water level changes.
PEILGEB_N	The identification number of the level area which the plot belongs to.	268
BODEM_N	The type of soil primarily present in the plot	1 = peat, 2 = clay, 3 = clay on peat, 4 = sand	3
GEM_PEIL	The average water level in this level area, measured from Amsterdam Ordnance Datum (NAP).
This value is not required for this file, but for the derived "peilgebieden" file.
SUBSIDENCE	Whether this plot is subject to subsidence.	1	When this attribute is not present, subsidence is calculated. When this attribute is present and it's value is 0, subsidence is not calculated. When this attribute is present and it's value is not 0, subsidence is calculated.
PEIL_LAGER	The level area to which excess water is pumped off.	268	If this value is not present, water is presumed to be pumped out of the plan area.
URBANIZATION	How urban this level area is. Lower values are a more urban area. Higher values are a more rural area.	3